// Copyright 2015-2021 Benjamin Fry <benjaminfry@me.com>
//
// Licensed under the Apache License, Version 2.0, <LICENSE-APACHE or
// http://apache.org/licenses/LICENSE-2.0> or the MIT license <LICENSE-MIT or
// http://opensource.org/licenses/MIT>, at your option. This file may not be
// copied, modified, or distributed except according to those terms.

//! Basic protocol message for DNS

use std::{fmt, iter, mem, ops::Deref, sync::Arc};

use tracing::{debug, warn};

use crate::{
    error::*,
    op::{Edns, Header, MessageType, OpCode, Query, ResponseCode},
    rr::{Record, RecordType},
    serialize::binary::{BinDecodable, BinDecoder, BinEncodable, BinEncoder, EncodeMode},
    xfer::DnsResponse,
};

/// The basic request and response datastructure, used for all DNS protocols.
///
/// [RFC 1035, DOMAIN NAMES - IMPLEMENTATION AND SPECIFICATION, November 1987](https://tools.ietf.org/html/rfc1035)
///
/// ```text
/// 4.1. Format
///
/// All communications inside of the domain protocol are carried in a single
/// format called a message.  The top level format of message is divided
/// into 5 sections (some of which are empty in certain cases) shown below:
///
///     +--------------------------+
///     |        Header            |
///     +--------------------------+
///     |  Question / Zone         | the question for the name server
///     +--------------------------+
///     |   Answer  / Prerequisite | RRs answering the question
///     +--------------------------+
///     | Authority / Update       | RRs pointing toward an authority
///     +--------------------------+
///     |      Additional          | RRs holding additional information
///     +--------------------------+
///
/// The header section is always present.  The header includes fields that
/// specify which of the remaining sections are present, and also specify
/// whether the message is a query or a response, a standard query or some
/// other opcode, etc.
///
/// The names of the sections after the header are derived from their use in
/// standard queries.  The question section contains fields that describe a
/// question to a name server.  These fields are a query type (QTYPE), a
/// query class (QCLASS), and a query domain name (QNAME).  The last three
/// sections have the same format: a possibly empty list of concatenated
/// resource records (RRs).  The answer section contains RRs that answer the
/// question; the authority section contains RRs that point toward an
/// authoritative name server; the additional records section contains RRs
/// which relate to the query, but are not strictly answers for the
/// question.
/// ```
///
/// By default Message is a Query. Use the Message::as_update() to create and update, or
///  Message::new_update()
#[derive(Clone, Debug, PartialEq, Eq, Default)]
pub struct Message {
    header: Header,
    queries: Vec<Query>,
    answers: Vec<Record>,
    name_servers: Vec<Record>,
    additionals: Vec<Record>,
    signature: Vec<Record>,
    edns: Option<Edns>,
}

/// Returns a new Header with accurate counts for each Message section
pub fn update_header_counts(
    current_header: &Header,
    is_truncated: bool,
    counts: HeaderCounts,
) -> Header {
    assert!(counts.query_count <= u16::max_value() as usize);
    assert!(counts.answer_count <= u16::max_value() as usize);
    assert!(counts.nameserver_count <= u16::max_value() as usize);
    assert!(counts.additional_count <= u16::max_value() as usize);

    // TODO: should the function just take by value?
    let mut header = *current_header;
    header
        .set_query_count(counts.query_count as u16)
        .set_answer_count(counts.answer_count as u16)
        .set_name_server_count(counts.nameserver_count as u16)
        .set_additional_count(counts.additional_count as u16)
        .set_truncated(is_truncated);

    header
}

/// Tracks the counts of the records in the Message.
///
/// This is only used internally during serialization.
#[derive(Clone, Copy, Debug)]
pub struct HeaderCounts {
    /// The number of queries in the Message
    pub query_count: usize,
    /// The number of answers in the Message
    pub answer_count: usize,
    /// The number of nameservers or authorities in the Message
    pub nameserver_count: usize,
    /// The number of additional records in the Message
    pub additional_count: usize,
}

impl Message {
    /// Returns a new "empty" Message
    pub fn new() -> Self {
        Self {
            header: Header::new(),
            queries: Vec::new(),
            answers: Vec::new(),
            name_servers: Vec::new(),
            additionals: Vec::new(),
            signature: Vec::new(),
            edns: None,
        }
    }

    /// Returns a Message constructed with error details to return to a client
    ///
    /// # Arguments
    ///
    /// * `id` - message id should match the request message id
    /// * `op_code` - operation of the request
    /// * `response_code` - the error code for the response
    pub fn error_msg(id: u16, op_code: OpCode, response_code: ResponseCode) -> Self {
        let mut message = Self::new();
        message
            .set_message_type(MessageType::Response)
            .set_id(id)
            .set_response_code(response_code)
            .set_op_code(op_code);

        message
    }

    /// Truncates a Message, this blindly removes all response fields and sets truncated to `true`
    pub fn truncate(&self) -> Self {
        let mut truncated = self.clone();
        truncated.set_truncated(true);
        // drops additional/answer/queries so len is 0
        truncated.take_additionals();
        truncated.take_answers();
        truncated.take_queries();

        // TODO, perhaps just quickly add a few response records here? that we know would fit?
        truncated
    }

    /// Sets the `Header` with provided
    pub fn set_header(&mut self, header: Header) -> &mut Self {
        self.header = header;
        self
    }

    /// see `Header::set_id`
    pub fn set_id(&mut self, id: u16) -> &mut Self {
        self.header.set_id(id);
        self
    }

    /// see `Header::set_message_type`
    pub fn set_message_type(&mut self, message_type: MessageType) -> &mut Self {
        self.header.set_message_type(message_type);
        self
    }

    /// see `Header::set_op_code`
    pub fn set_op_code(&mut self, op_code: OpCode) -> &mut Self {
        self.header.set_op_code(op_code);
        self
    }

    /// see `Header::set_authoritative`
    pub fn set_authoritative(&mut self, authoritative: bool) -> &mut Self {
        self.header.set_authoritative(authoritative);
        self
    }

    /// see `Header::set_truncated`
    pub fn set_truncated(&mut self, truncated: bool) -> &mut Self {
        self.header.set_truncated(truncated);
        self
    }

    /// see `Header::set_recursion_desired`
    pub fn set_recursion_desired(&mut self, recursion_desired: bool) -> &mut Self {
        self.header.set_recursion_desired(recursion_desired);
        self
    }

    /// see `Header::set_recursion_available`
    pub fn set_recursion_available(&mut self, recursion_available: bool) -> &mut Self {
        self.header.set_recursion_available(recursion_available);
        self
    }

    /// see `Header::set_authentic_data`
    pub fn set_authentic_data(&mut self, authentic_data: bool) -> &mut Self {
        self.header.set_authentic_data(authentic_data);
        self
    }

    /// see `Header::set_checking_disabled`
    pub fn set_checking_disabled(&mut self, checking_disabled: bool) -> &mut Self {
        self.header.set_checking_disabled(checking_disabled);
        self
    }

    /// see `Header::set_response_code`
    pub fn set_response_code(&mut self, response_code: ResponseCode) -> &mut Self {
        self.header.set_response_code(response_code);
        self
    }

    /// Add a query to the Message, either the query response from the server, or the request Query.
    pub fn add_query(&mut self, query: Query) -> &mut Self {
        self.queries.push(query);
        self
    }

    /// Adds an iterator over a set of Queries to be added to the message
    pub fn add_queries<Q, I>(&mut self, queries: Q) -> &mut Self
    where
        Q: IntoIterator<Item = Query, IntoIter = I>,
        I: Iterator<Item = Query>,
    {
        for query in queries {
            self.add_query(query);
        }

        self
    }

    /// Add an answer to the Message
    pub fn add_answer(&mut self, record: Record) -> &mut Self {
        self.answers.push(record);
        self
    }

    /// Add all the records from the iterator to the answers section of the Message
    pub fn add_answers<R, I>(&mut self, records: R) -> &mut Self
    where
        R: IntoIterator<Item = Record, IntoIter = I>,
        I: Iterator<Item = Record>,
    {
        for record in records {
            self.add_answer(record);
        }

        self
    }

    /// Sets the answers to the specified set of Records.
    ///
    /// # Panics
    ///
    /// Will panic if answer records are already associated to the message.
    pub fn insert_answers(&mut self, records: Vec<Record>) {
        assert!(self.answers.is_empty());
        self.answers = records;
    }

    /// Add a name server record to the Message
    pub fn add_name_server(&mut self, record: Record) -> &mut Self {
        self.name_servers.push(record);
        self
    }

    /// Add all the records in the Iterator to the name server section of the message
    pub fn add_name_servers<R, I>(&mut self, records: R) -> &mut Self
    where
        R: IntoIterator<Item = Record, IntoIter = I>,
        I: Iterator<Item = Record>,
    {
        for record in records {
            self.add_name_server(record);
        }

        self
    }

    /// Sets the name_servers to the specified set of Records.
    ///
    /// # Panics
    ///
    /// Will panic if name_servers records are already associated to the message.
    pub fn insert_name_servers(&mut self, records: Vec<Record>) {
        assert!(self.name_servers.is_empty());
        self.name_servers = records;
    }

    /// Add an additional Record to the message
    pub fn add_additional(&mut self, record: Record) -> &mut Self {
        self.additionals.push(record);
        self
    }

    /// Add all the records from the iterator to the additionals section of the Message
    pub fn add_additionals<R, I>(&mut self, records: R) -> &mut Self
    where
        R: IntoIterator<Item = Record, IntoIter = I>,
        I: Iterator<Item = Record>,
    {
        for record in records {
            self.add_additional(record);
        }

        self
    }

    /// Sets the additional to the specified set of Records.
    ///
    /// # Panics
    ///
    /// Will panic if additional records are already associated to the message.
    pub fn insert_additionals(&mut self, records: Vec<Record>) {
        assert!(self.additionals.is_empty());
        self.additionals = records;
    }

    /// Add the EDNS section to the Message
    pub fn set_edns(&mut self, edns: Edns) -> &mut Self {
        self.edns = Some(edns);
        self
    }

    /// Add a SIG0 record, i.e. sign this message
    ///
    /// This must be used only after all records have been associated. Generally this will be handled by the client and not need to be used directly
    #[cfg(feature = "dnssec")]
    #[cfg_attr(docsrs, doc(cfg(feature = "dnssec")))]
    pub fn add_sig0(&mut self, record: Record) -> &mut Self {
        assert_eq!(RecordType::SIG, record.rr_type());
        self.signature.push(record);
        self
    }

    /// Add a TSIG record, i.e. authenticate this message
    ///
    /// This must be used only after all records have been associated. Generally this will be handled by the client and not need to be used directly
    #[cfg(feature = "dnssec")]
    #[cfg_attr(docsrs, doc(cfg(feature = "dnssec")))]
    pub fn add_tsig(&mut self, record: Record) -> &mut Self {
        assert_eq!(RecordType::TSIG, record.rr_type());
        self.signature.push(record);
        self
    }

    /// Gets the header of the Message
    pub fn header(&self) -> &Header {
        &self.header
    }

    /// see `Header::id()`
    pub fn id(&self) -> u16 {
        self.header.id()
    }

    /// see `Header::message_type()`
    pub fn message_type(&self) -> MessageType {
        self.header.message_type()
    }

    /// see `Header::op_code()`
    pub fn op_code(&self) -> OpCode {
        self.header.op_code()
    }

    /// see `Header::authoritative()`
    pub fn authoritative(&self) -> bool {
        self.header.authoritative()
    }

    /// see `Header::truncated()`
    pub fn truncated(&self) -> bool {
        self.header.truncated()
    }

    /// see `Header::recursion_desired()`
    pub fn recursion_desired(&self) -> bool {
        self.header.recursion_desired()
    }

    /// see `Header::recursion_available()`
    pub fn recursion_available(&self) -> bool {
        self.header.recursion_available()
    }

    /// see `Header::authentic_data()`
    pub fn authentic_data(&self) -> bool {
        self.header.authentic_data()
    }

    /// see `Header::checking_disabled()`
    pub fn checking_disabled(&self) -> bool {
        self.header.checking_disabled()
    }

    /// # Return value
    ///
    /// The `ResponseCode`, if this is an EDNS message then this will join the section from the OPT
    ///  record to create the EDNS `ResponseCode`
    pub fn response_code(&self) -> ResponseCode {
        self.header.response_code()
    }

    /// Returns the query from this Message.
    ///
    /// In almost all cases, a Message will only contain one query. This is a convenience function to get the single query.
    /// See the alternative `queries*` methods for the raw set of queries in the Message
    pub fn query(&self) -> Option<&Query> {
        self.queries.first()
    }

    /// ```text
    /// Question        Carries the query name and other query parameters.
    /// ```
    pub fn queries(&self) -> &[Query] {
        &self.queries
    }

    /// Provides mutable access to `queries`
    pub fn queries_mut(&mut self) -> &mut Vec<Query> {
        &mut self.queries
    }

    /// Removes all the answers from the Message
    pub fn take_queries(&mut self) -> Vec<Query> {
        mem::take(&mut self.queries)
    }

    /// ```text
    /// Answer          Carries RRs which directly answer the query.
    /// ```
    pub fn answers(&self) -> &[Record] {
        &self.answers
    }

    /// Provides mutable access to `answers`
    pub fn answers_mut(&mut self) -> &mut Vec<Record> {
        &mut self.answers
    }

    /// Removes all the answers from the Message
    pub fn take_answers(&mut self) -> Vec<Record> {
        mem::take(&mut self.answers)
    }

    /// ```text
    /// Authority       Carries RRs which describe other authoritative servers.
    ///                 May optionally carry the SOA RR for the authoritative
    ///                 data in the answer section.
    /// ```
    pub fn name_servers(&self) -> &[Record] {
        &self.name_servers
    }

    /// Provides mutable access to `name_servers`
    pub fn name_servers_mut(&mut self) -> &mut Vec<Record> {
        &mut self.name_servers
    }

    /// Remove the name servers from the Message
    pub fn take_name_servers(&mut self) -> Vec<Record> {
        mem::take(&mut self.name_servers)
    }

    /// ```text
    /// Additional      Carries RRs which may be helpful in using the RRs in the
    ///                 other sections.
    /// ```
    pub fn additionals(&self) -> &[Record] {
        &self.additionals
    }

    /// Provides mutable access to `additionals`
    pub fn additionals_mut(&mut self) -> &mut Vec<Record> {
        &mut self.additionals
    }

    /// Remove the additional Records from the Message
    pub fn take_additionals(&mut self) -> Vec<Record> {
        mem::take(&mut self.additionals)
    }

    /// All sections chained
    pub fn all_sections(&self) -> impl Iterator<Item = &Record> {
        self.answers
            .iter()
            .chain(self.name_servers().iter())
            .chain(self.additionals.iter())
    }

    /// [RFC 6891, EDNS(0) Extensions, April 2013](https://tools.ietf.org/html/rfc6891#section-6.1.1)
    ///
    /// ```text
    /// 6.1.1.  Basic Elements
    ///
    ///  An OPT pseudo-RR (sometimes called a meta-RR) MAY be added to the
    ///  additional data section of a request.
    ///
    ///  The OPT RR has RR type 41.
    ///
    ///  If an OPT record is present in a received request, compliant
    ///  responders MUST include an OPT record in their respective responses.
    ///
    ///  An OPT record does not carry any DNS data.  It is used only to
    ///  contain control information pertaining to the question-and-answer
    ///  sequence of a specific transaction.  OPT RRs MUST NOT be cached,
    ///  forwarded, or stored in or loaded from Zone Files.
    ///
    ///  The OPT RR MAY be placed anywhere within the additional data section.
    ///  When an OPT RR is included within any DNS message, it MUST be the
    ///  only OPT RR in that message.  If a query message with more than one
    ///  OPT RR is received, a FORMERR (RCODE=1) MUST be returned.  The
    ///  placement flexibility for the OPT RR does not override the need for
    ///  the TSIG or SIG(0) RRs to be the last in the additional section
    ///  whenever they are present.
    /// ```
    /// # Return value
    ///
    /// Optionally returns a reference to EDNS section
    #[deprecated(note = "Please use `extensions()`")]
    pub fn edns(&self) -> Option<&Edns> {
        self.edns.as_ref()
    }

    /// Optionally returns mutable reference to EDNS section
    #[deprecated(
        note = "Please use `extensions_mut()`. You can chain `.get_or_insert_with(Edns::new)` to recover original behavior of adding Edns if not present"
    )]
    pub fn edns_mut(&mut self) -> &mut Edns {
        if self.edns.is_none() {
            self.set_edns(Edns::new());
        }
        self.edns.as_mut().unwrap()
    }

    /// Returns reference of Edns section
    pub fn extensions(&self) -> &Option<Edns> {
        &self.edns
    }

    /// Returns mutable reference of Edns section
    pub fn extensions_mut(&mut self) -> &mut Option<Edns> {
        &mut self.edns
    }

    /// # Return value
    ///
    /// the max payload value as it's defined in the EDNS section.
    pub fn max_payload(&self) -> u16 {
        let max_size = self.edns.as_ref().map_or(512, Edns::max_payload);
        if max_size < 512 {
            512
        } else {
            max_size
        }
    }

    /// # Return value
    ///
    /// the version as defined in the EDNS record
    pub fn version(&self) -> u8 {
        self.edns.as_ref().map_or(0, Edns::version)
    }

    /// [RFC 2535, Domain Name System Security Extensions, March 1999](https://tools.ietf.org/html/rfc2535#section-4)
    ///
    /// ```text
    /// A DNS request may be optionally signed by including one or more SIGs
    ///  at the end of the query. Such SIGs are identified by having a "type
    ///  covered" field of zero. They sign the preceding DNS request message
    ///  including DNS header but not including the IP header or any request
    ///  SIGs at the end and before the request RR counts have been adjusted
    ///  for the inclusions of any request SIG(s).
    /// ```
    ///
    /// # Return value
    ///
    /// The sig0 and tsig, i.e. signed record, for verifying the sending and package integrity
    // comportment change: can now return TSIG instead of SIG0. Maybe should get deprecated in
    // favor of signature() which have more correct naming ?
    pub fn sig0(&self) -> &[Record] {
        &self.signature
    }

    /// [RFC 2535, Domain Name System Security Extensions, March 1999](https://tools.ietf.org/html/rfc2535#section-4)
    ///
    /// ```text
    /// A DNS request may be optionally signed by including one or more SIGs
    ///  at the end of the query. Such SIGs are identified by having a "type
    ///  covered" field of zero. They sign the preceding DNS request message
    ///  including DNS header but not including the IP header or any request
    ///  SIGs at the end and before the request RR counts have been adjusted
    ///  for the inclusions of any request SIG(s).
    /// ```
    ///
    /// # Return value
    ///
    /// The sig0 and tsig, i.e. signed record, for verifying the sending and package integrity
    pub fn signature(&self) -> &[Record] {
        &self.signature
    }

    /// Remove signatures from the Message
    pub fn take_signature(&mut self) -> Vec<Record> {
        mem::take(&mut self.signature)
    }

    // TODO: only necessary in tests, should it be removed?
    /// this is necessary to match the counts in the header from the record sections
    ///  this happens implicitly on write_to, so no need to call before write_to
    #[cfg(test)]
    pub fn update_counts(&mut self) -> &mut Self {
        self.header = update_header_counts(
            &self.header,
            self.truncated(),
            HeaderCounts {
                query_count: self.queries.len(),
                answer_count: self.answers.len(),
                nameserver_count: self.name_servers.len(),
                additional_count: self.additionals.len(),
            },
        );
        self
    }

    /// Attempts to read the specified number of `Query`s
    pub fn read_queries(decoder: &mut BinDecoder<'_>, count: usize) -> ProtoResult<Vec<Query>> {
        let mut queries = Vec::with_capacity(count);
        for _ in 0..count {
            queries.push(Query::read(decoder)?);
        }
        Ok(queries)
    }

    /// Attempts to read the specified number of records
    ///
    /// # Returns
    ///
    /// This returns a tuple of first standard Records, then a possibly associated Edns, and then finally any optionally associated SIG0 and TSIG records.
    #[cfg_attr(not(feature = "dnssec"), allow(unused_mut))]
    pub fn read_records(
        decoder: &mut BinDecoder<'_>,
        count: usize,
        is_additional: bool,
    ) -> ProtoResult<(Vec<Record>, Option<Edns>, Vec<Record>)> {
        let mut records: Vec<Record> = Vec::with_capacity(count);
        let mut edns: Option<Edns> = None;
        let mut sigs: Vec<Record> = Vec::with_capacity(if is_additional { 1 } else { 0 });

        // sig0 must be last, once this is set, disable.
        let mut saw_sig0 = false;
        // tsig must be last, once this is set, disable.
        let mut saw_tsig = false;
        for _ in 0..count {
            let record = Record::read(decoder)?;
            if saw_tsig {
                return Err("tsig must be final resource record".into());
            } // TSIG must be last and multiple TSIG records are not allowed
            if !is_additional {
                if saw_sig0 {
                    return Err("sig0 must be final resource record".into());
                } // SIG0 must be last
                records.push(record)
            } else {
                match record.rr_type() {
                    #[cfg(feature = "dnssec")]
                    RecordType::SIG => {
                        saw_sig0 = true;
                        sigs.push(record);
                    }
                    #[cfg(feature = "dnssec")]
                    RecordType::TSIG => {
                        if saw_sig0 {
                            return Err("sig0 must be final resource record".into());
                        } // SIG0 must be last
                        saw_tsig = true;
                        sigs.push(record);
                    }
                    RecordType::OPT => {
                        if saw_sig0 {
                            return Err("sig0 must be final resource record".into());
                        } // SIG0 must be last
                        if edns.is_some() {
                            return Err("more than one edns record present".into());
                        }
                        edns = Some((&record).into());
                    }
                    _ => {
                        if saw_sig0 {
                            return Err("sig0 must be final resource record".into());
                        } // SIG0 must be last
                        records.push(record);
                    }
                }
            }
        }

        Ok((records, edns, sigs))
    }

    /// Decodes a message from the buffer.
    pub fn from_vec(buffer: &[u8]) -> ProtoResult<Self> {
        let mut decoder = BinDecoder::new(buffer);
        Self::read(&mut decoder)
    }

    /// Encodes the Message into a buffer
    pub fn to_vec(&self) -> Result<Vec<u8>, ProtoError> {
        // TODO: this feels like the right place to verify the max packet size of the message,
        //  will need to update the header for truncation and the lengths if we send less than the
        //  full response. This needs to conform with the EDNS settings of the server...
        let mut buffer = Vec::with_capacity(512);
        {
            let mut encoder = BinEncoder::new(&mut buffer);
            self.emit(&mut encoder)?;
        }

        Ok(buffer)
    }

    /// Finalize the message prior to sending.
    ///
    /// Subsequent to calling this, the Message should not change.
    #[allow(clippy::match_single_binding)]
    pub fn finalize<MF: MessageFinalizer>(
        &mut self,
        finalizer: &MF,
        inception_time: u32,
    ) -> ProtoResult<Option<MessageVerifier>> {
        debug!("finalizing message: {:?}", self);
        let (finals, verifier): (Vec<Record>, Option<MessageVerifier>) =
            finalizer.finalize_message(self, inception_time)?;

        // append all records to message
        for fin in finals {
            match fin.rr_type() {
                // SIG0's are special, and come at the very end of the message
                #[cfg(feature = "dnssec")]
                RecordType::SIG => self.add_sig0(fin),
                #[cfg(feature = "dnssec")]
                RecordType::TSIG => self.add_tsig(fin),
                _ => self.add_additional(fin),
            };
        }

        Ok(verifier)
    }

    /// Consumes `Message` and returns into components
    pub fn into_parts(self) -> MessageParts {
        self.into()
    }
}

/// Consumes `Message` giving public access to fields in `Message` so they can be
/// destructured and taken by value
/// ```rust
/// use trust_dns_proto::op::{Message, MessageParts};
///
///  let msg = Message::new();
///  let MessageParts { queries, .. } = msg.into_parts();
/// ```
#[derive(Clone, Debug, PartialEq, Eq, Default)]
pub struct MessageParts {
    /// message header
    pub header: Header,
    /// message queries
    pub queries: Vec<Query>,
    /// message answers
    pub answers: Vec<Record>,
    /// message name_servers
    pub name_servers: Vec<Record>,
    /// message additional records
    pub additionals: Vec<Record>,
    /// sig0 or tsig
    // this can now contains TSIG too. It should probably be renamed to reflect that, but it's a
    // breaking change
    pub sig0: Vec<Record>,
    /// optional edns records
    pub edns: Option<Edns>,
}

impl From<Message> for MessageParts {
    fn from(msg: Message) -> Self {
        let Message {
            header,
            queries,
            answers,
            name_servers,
            additionals,
            signature,
            edns,
        } = msg;
        Self {
            header,
            queries,
            answers,
            name_servers,
            additionals,
            sig0: signature,
            edns,
        }
    }
}

impl From<MessageParts> for Message {
    fn from(msg: MessageParts) -> Self {
        let MessageParts {
            header,
            queries,
            answers,
            name_servers,
            additionals,
            sig0,
            edns,
        } = msg;
        Self {
            header,
            queries,
            answers,
            name_servers,
            additionals,
            signature: sig0,
            edns,
        }
    }
}

impl Deref for Message {
    type Target = Header;

    fn deref(&self) -> &Self::Target {
        &self.header
    }
}

/// Alias for a function verifying if a message is properly signed
pub type MessageVerifier = Box<dyn FnMut(&[u8]) -> ProtoResult<DnsResponse> + Send>;

/// A trait for performing final amendments to a Message before it is sent.
///
/// An example of this is a SIG0 signer, which needs the final form of the message,
///  but then needs to attach additional data to the body of the message.
pub trait MessageFinalizer: Send + Sync + 'static {
    /// The message taken in should be processed and then return [`Record`]s which should be
    ///  appended to the additional section of the message.
    ///
    /// # Arguments
    ///
    /// * `message` - message to process
    /// * `current_time` - the current time as specified by the system, it's not recommended to read the current time as that makes testing complicated.
    ///
    /// # Return
    ///
    /// A vector to append to the additionals section of the message, sorted in the order as they should appear in the message.
    fn finalize_message(
        &self,
        message: &Message,
        current_time: u32,
    ) -> ProtoResult<(Vec<Record>, Option<MessageVerifier>)>;

    /// Return whether the message require futher processing before being sent
    /// By default, returns true for AXFR and IXFR queries, and Update and Notify messages
    fn should_finalize_message(&self, message: &Message) -> bool {
        [OpCode::Update, OpCode::Notify].contains(&message.op_code())
            || message
                .queries()
                .iter()
                .any(|q| [RecordType::AXFR, RecordType::IXFR].contains(&q.query_type()))
    }
}

/// A MessageFinalizer which does nothing
///
/// *WARNING* This should only be used in None context, it will panic in all cases where finalize is called.
#[derive(Clone, Copy, Debug)]
pub struct NoopMessageFinalizer;

impl NoopMessageFinalizer {
    /// Always returns None
    pub fn new() -> Option<Arc<Self>> {
        None
    }
}

impl MessageFinalizer for NoopMessageFinalizer {
    fn finalize_message(
        &self,
        _: &Message,
        _: u32,
    ) -> ProtoResult<(Vec<Record>, Option<MessageVerifier>)> {
        panic!("Misused NoopMessageFinalizer, None should be used instead")
    }

    fn should_finalize_message(&self, _: &Message) -> bool {
        true
    }
}

/// Returns the count written and a boolean if it was truncated
pub fn count_was_truncated(result: ProtoResult<usize>) -> ProtoResult<(usize, bool)> {
    result.map(|count| (count, false)).or_else(|e| {
        if let ProtoErrorKind::NotAllRecordsWritten { count } = e.kind() {
            return Ok((*count, true));
        }

        Err(e)
    })
}

/// A trait that defines types which can be emitted as a set, with the associated count returned.
pub trait EmitAndCount {
    /// Emit self to the encoder and return the count of items
    fn emit(&mut self, encoder: &mut BinEncoder<'_>) -> ProtoResult<usize>;
}

impl<'e, I: Iterator<Item = &'e E>, E: 'e + BinEncodable> EmitAndCount for I {
    fn emit(&mut self, encoder: &mut BinEncoder<'_>) -> ProtoResult<usize> {
        encoder.emit_all(self)
    }
}

/// Emits the different sections of a message properly
///
/// # Return
///
/// In the case of a successful emit, the final header (updated counts, etc) is returned for help with logging, etc.
#[allow(clippy::too_many_arguments)]
pub fn emit_message_parts<Q, A, N, D>(
    header: &Header,
    queries: &mut Q,
    answers: &mut A,
    name_servers: &mut N,
    additionals: &mut D,
    edns: Option<&Edns>,
    signature: &[Record],
    encoder: &mut BinEncoder<'_>,
) -> ProtoResult<Header>
where
    Q: EmitAndCount,
    A: EmitAndCount,
    N: EmitAndCount,
    D: EmitAndCount,
{
    let include_signature: bool = encoder.mode() != EncodeMode::Signing;
    let place = encoder.place::<Header>()?;

    let query_count = queries.emit(encoder)?;
    // TODO: need to do something on max records
    //  return offset of last emitted record.
    let answer_count = count_was_truncated(answers.emit(encoder))?;
    let nameserver_count = count_was_truncated(name_servers.emit(encoder))?;
    let mut additional_count = count_was_truncated(additionals.emit(encoder))?;

    if let Some(mut edns) = edns.cloned() {
        // need to commit the error code
        edns.set_rcode_high(header.response_code().high());

        let count = count_was_truncated(encoder.emit_all(iter::once(&Record::from(&edns))))?;
        additional_count.0 += count.0;
        additional_count.1 |= count.1;
    } else if header.response_code().high() > 0 {
        warn!(
            "response code: {} for request: {} requires EDNS but none available",
            header.response_code(),
            header.id()
        );
    }

    // this is a little hacky, but if we are Verifying a signature, i.e. the original Message
    //  then the SIG0 records should not be encoded and the edns record (if it exists) is already
    //  part of the additionals section.
    if include_signature {
        let count = count_was_truncated(encoder.emit_all(signature.iter()))?;
        additional_count.0 += count.0;
        additional_count.1 |= count.1;
    }

    let counts = HeaderCounts {
        query_count,
        answer_count: answer_count.0,
        nameserver_count: nameserver_count.0,
        additional_count: additional_count.0,
    };
    let was_truncated =
        header.truncated() || answer_count.1 || nameserver_count.1 || additional_count.1;

    let final_header = update_header_counts(header, was_truncated, counts);
    place.replace(encoder, final_header)?;
    Ok(final_header)
}

impl BinEncodable for Message {
    fn emit(&self, encoder: &mut BinEncoder<'_>) -> ProtoResult<()> {
        emit_message_parts(
            &self.header,
            &mut self.queries.iter(),
            &mut self.answers.iter(),
            &mut self.name_servers.iter(),
            &mut self.additionals.iter(),
            self.edns.as_ref(),
            &self.signature,
            encoder,
        )?;

        Ok(())
    }
}

impl<'r> BinDecodable<'r> for Message {
    fn read(decoder: &mut BinDecoder<'r>) -> ProtoResult<Self> {
        let mut header = Header::read(decoder)?;

        // TODO: return just header, and in the case of the rest of message getting an error.
        //  this could improve error detection while decoding.

        // get the questions
        let count = header.query_count() as usize;
        let mut queries = Vec::with_capacity(count);
        for _ in 0..count {
            queries.push(Query::read(decoder)?);
        }

        // get all counts before header moves
        let answer_count = header.answer_count() as usize;
        let name_server_count = header.name_server_count() as usize;
        let additional_count = header.additional_count() as usize;

        let (answers, _, _) = Self::read_records(decoder, answer_count, false)?;
        let (name_servers, _, _) = Self::read_records(decoder, name_server_count, false)?;
        let (additionals, edns, signature) = Self::read_records(decoder, additional_count, true)?;

        // need to grab error code from EDNS (which might have a higher value)
        if let Some(edns) = &edns {
            let high_response_code = edns.rcode_high();
            header.merge_response_code(high_response_code);
        }

        Ok(Self {
            header,
            queries,
            answers,
            name_servers,
            additionals,
            signature,
            edns,
        })
    }
}

impl fmt::Display for Message {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> Result<(), fmt::Error> {
        let write_query = |slice, f: &mut fmt::Formatter<'_>| -> Result<(), fmt::Error> {
            for d in slice {
                writeln!(f, ";; {}", d)?;
            }

            Ok(())
        };

        let write_slice = |slice, f: &mut fmt::Formatter<'_>| -> Result<(), fmt::Error> {
            for d in slice {
                writeln!(f, "{}", d)?;
            }

            Ok(())
        };

        writeln!(f, "; header {header}", header = self.header())?;

        if let Some(edns) = self.extensions() {
            writeln!(f, "; edns {}", edns)?;
        }

        writeln!(f, "; query")?;
        write_query(self.queries(), f)?;

        if self.header().message_type() == MessageType::Response
            || self.header().op_code() == OpCode::Update
        {
            writeln!(f, "; answers {}", self.answer_count())?;
            write_slice(self.answers(), f)?;
            writeln!(f, "; nameservers {}", self.name_server_count())?;
            write_slice(self.name_servers(), f)?;
            writeln!(f, "; additionals {}", self.additional_count())?;
            write_slice(self.additionals(), f)?;
        }

        Ok(())
    }
}

#[test]
fn test_emit_and_read_header() {
    let mut message = Message::new();
    message
        .set_id(10)
        .set_message_type(MessageType::Response)
        .set_op_code(OpCode::Update)
        .set_authoritative(true)
        .set_truncated(false)
        .set_recursion_desired(true)
        .set_recursion_available(true)
        .set_response_code(ResponseCode::ServFail);

    test_emit_and_read(message);
}

#[test]
fn test_emit_and_read_query() {
    let mut message = Message::new();
    message
        .set_id(10)
        .set_message_type(MessageType::Response)
        .set_op_code(OpCode::Update)
        .set_authoritative(true)
        .set_truncated(true)
        .set_recursion_desired(true)
        .set_recursion_available(true)
        .set_response_code(ResponseCode::ServFail)
        .add_query(Query::new())
        .update_counts(); // we're not testing the query parsing, just message

    test_emit_and_read(message);
}

#[test]
fn test_emit_and_read_records() {
    let mut message = Message::new();
    message
        .set_id(10)
        .set_message_type(MessageType::Response)
        .set_op_code(OpCode::Update)
        .set_authoritative(true)
        .set_truncated(true)
        .set_recursion_desired(true)
        .set_recursion_available(true)
        .set_authentic_data(true)
        .set_checking_disabled(true)
        .set_response_code(ResponseCode::ServFail);

    message.add_answer(Record::new());
    message.add_name_server(Record::new());
    message.add_additional(Record::new());
    message.update_counts(); // needed for the comparison...

    test_emit_and_read(message);
}

#[cfg(test)]
fn test_emit_and_read(message: Message) {
    let mut byte_vec: Vec<u8> = Vec::with_capacity(512);
    {
        let mut encoder = BinEncoder::new(&mut byte_vec);
        message.emit(&mut encoder).unwrap();
    }

    let mut decoder = BinDecoder::new(&byte_vec);
    let got = Message::read(&mut decoder).unwrap();

    assert_eq!(got, message);
}

#[test]
#[rustfmt::skip]
fn test_legit_message() {
    let buf: Vec<u8> = vec![
    0x10,0x00,0x81,0x80, // id = 4096, response, op=query, recursion_desired, recursion_available, no_error
    0x00,0x01,0x00,0x01, // 1 query, 1 answer,
    0x00,0x00,0x00,0x00, // 0 namesservers, 0 additional record

    0x03,b'w',b'w',b'w', // query --- www.example.com
    0x07,b'e',b'x',b'a', //
    b'm',b'p',b'l',b'e', //
    0x03,b'c',b'o',b'm', //
    0x00,                // 0 = endname
    0x00,0x01,0x00,0x01, // ReordType = A, Class = IN

    0xC0,0x0C,           // name pointer to www.example.com
    0x00,0x01,0x00,0x01, // RecordType = A, Class = IN
    0x00,0x00,0x00,0x02, // TTL = 2 seconds
    0x00,0x04,           // record length = 4 (ipv4 address)
    0x5D,0xB8,0xD8,0x22, // address = 93.184.216.34
    ];

    let mut decoder = BinDecoder::new(&buf);
    let message = Message::read(&mut decoder).unwrap();

    assert_eq!(message.id(), 4096);

    let mut buf: Vec<u8> = Vec::with_capacity(512);
    {
        let mut encoder = BinEncoder::new(&mut buf);
        message.emit(&mut encoder).unwrap();
    }

    let mut decoder = BinDecoder::new(&buf);
    let message = Message::read(&mut decoder).unwrap();

    assert_eq!(message.id(), 4096);
}

#[test]
fn rdata_zero_roundtrip() {
    let buf = &[
        160, 160, 0, 13, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 1, 0,
    ];

    assert!(Message::from_bytes(buf).is_err());
}