pub struct ChargeTransactionPayment<T: Config>(_);
Expand description

Require the transactor pay for themselves and maybe include a tip to gain additional priority in the queue.

Transaction Validity

This extension sets the priority field of TransactionValidity depending on the amount of tip being paid per weight unit.

Operational transactions will receive an additional priority bump, so that they are normally considered before regular transactions.

Implementations§

source§

impl<T: Config> ChargeTransactionPayment<T>where T::RuntimeCall: Dispatchable<Info = DispatchInfo, PostInfo = PostDispatchInfo>, <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance: Send + Sync + FixedPointOperand,

source

pub fn from( fee: <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance ) -> Self

utility constructor. Used only in client/factory code.

source

pub fn tip( &self ) -> <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance

Returns the tip as being chosen by the transaction sender.

source

pub fn get_priority( info: &DispatchInfoOf<T::RuntimeCall>, len: usize, tip: <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance, final_fee: <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance ) -> TransactionPriority

Get an appropriate priority for a transaction with the given DispatchInfo, encoded length and user-included tip.

The priority is based on the amount of tip the user is willing to pay per unit of either weight or length, depending which one is more limiting. For Operational extrinsics we add a “virtual tip” to the calculations.

The formula should simply be tip / bounded_{weight|length}, but since we are using integer division, we have no guarantees it’s going to give results in any reasonable range (might simply end up being zero). Hence we use a scaling factor: tip * (max_block_{weight|length} / bounded_{weight|length}), since given current state of-the-art blockchains, number of per-block transactions is expected to be in a range reasonable enough to not saturate the Balance type while multiplying by the tip.

Trait Implementations§

source§

impl<T: Clone + Config> Clone for ChargeTransactionPayment<T>

source§

fn clone(&self) -> ChargeTransactionPayment<T>

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl<T: Config> Debug for ChargeTransactionPayment<T>

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl<T: Config> Decode for ChargeTransactionPayment<T>where <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance: HasCompact,

source§

fn decode<__CodecInputEdqy: Input>( __codec_input_edqy: &mut __CodecInputEdqy ) -> Result<Self, Error>

Attempt to deserialise the value from input.
source§

fn skip<I>(input: &mut I) -> Result<(), Error>where I: Input,

Attempt to skip the encoded value from input. Read more
source§

fn encoded_fixed_size() -> Option<usize>

Returns the fixed encoded size of the type. Read more
source§

impl<T: Config> Encode for ChargeTransactionPayment<T>where <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance: HasCompact,

source§

fn encode_to<__CodecOutputEdqy: Output + ?Sized>( &self, __codec_dest_edqy: &mut __CodecOutputEdqy )

Convert self to a slice and append it to the destination.
source§

fn encode(&self) -> Vec<u8>

Convert self to an owned vector.
source§

fn using_encoded<R, F: FnOnce(&[u8]) -> R>(&self, f: F) -> R

Convert self to a slice and then invoke the given closure with it.
source§

fn size_hint(&self) -> usize

If possible give a hint of expected size of the encoding. Read more
source§

fn encoded_size(&self) -> usize

Calculates the encoded size. Read more
source§

impl<T: PartialEq + Config> PartialEq<ChargeTransactionPayment<T>> for ChargeTransactionPayment<T>

source§

fn eq(&self, other: &ChargeTransactionPayment<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<T: Config> SignedExtension for ChargeTransactionPayment<T>where <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance: Send + Sync + From<u64> + FixedPointOperand, T::RuntimeCall: Dispatchable<Info = DispatchInfo, PostInfo = PostDispatchInfo>,

source§

const IDENTIFIER: &'static str = "ChargeTransactionPayment"

Unique identifier of this signed extension. Read more
§

type AccountId = <T as Config>::AccountId

The type which encodes the sender identity.
§

type Call = <T as Config>::RuntimeCall

The type which encodes the call to be dispatched.
§

type AdditionalSigned = ()

Any additional data that will go into the signed payload. This may be created dynamically from the transaction using the additional_signed function.
§

type Pre = (<<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance, <ChargeTransactionPayment<T> as SignedExtension>::AccountId, <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::LiquidityInfo)

The type that encodes information that can be passed from pre_dispatch to post-dispatch.
source§

fn additional_signed(&self) -> Result<(), TransactionValidityError>

Construct any additional data that should be in the signed payload of the transaction. Can also perform any pre-signature-verification checks and return an error if needed.
source§

fn validate( &self, who: &Self::AccountId, call: &Self::Call, info: &DispatchInfoOf<Self::Call>, len: usize ) -> TransactionValidity

Validate a signed transaction for the transaction queue. Read more
source§

fn pre_dispatch( self, who: &Self::AccountId, call: &Self::Call, info: &DispatchInfoOf<Self::Call>, len: usize ) -> Result<Self::Pre, TransactionValidityError>

Do any pre-flight stuff for a signed transaction. Read more
source§

fn post_dispatch( maybe_pre: Option<Self::Pre>, info: &DispatchInfoOf<Self::Call>, post_info: &PostDispatchInfoOf<Self::Call>, len: usize, _result: &DispatchResult ) -> Result<(), TransactionValidityError>

Do any post-flight stuff for an extrinsic. Read more
source§

fn validate_unsigned( _call: &Self::Call, _info: &<Self::Call as Dispatchable>::Info, _len: usize ) -> Result<ValidTransaction, TransactionValidityError>

Validate an unsigned transaction for the transaction queue. Read more
source§

fn pre_dispatch_unsigned( call: &Self::Call, info: &<Self::Call as Dispatchable>::Info, len: usize ) -> Result<(), TransactionValidityError>

Do any pre-flight stuff for a unsigned transaction. Read more
source§

fn metadata() -> Vec<SignedExtensionMetadata, Global>

Returns the metadata for this signed extension. Read more
source§

impl<T> TypeInfo for ChargeTransactionPayment<T>where <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance: HasCompact, T: Config + 'static,

§

type Identity = ChargeTransactionPayment<T>

The type identifying for which type info is provided. Read more
source§

fn type_info() -> Type

Returns the static type identifier for Self.
source§

impl<T: Config> EncodeLike<ChargeTransactionPayment<T>> for ChargeTransactionPayment<T>where <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance: HasCompact,

source§

impl<T: Eq + Config> Eq for ChargeTransactionPayment<T>

source§

impl<T: Config> StructuralEq for ChargeTransactionPayment<T>

source§

impl<T: Config> StructuralPartialEq for ChargeTransactionPayment<T>

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CheckedConversion for T

source§

fn checked_from<T>(t: T) -> Option<Self>where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more
source§

fn checked_into<T>(self) -> Option<T>where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more
source§

impl<T> Conv for T

source§

fn conv<T>(self) -> Twhere Self: Into<T>,

Converts self into T using Into<T>. Read more
source§

impl<T> DecodeAll for Twhere T: Decode,

source§

fn decode_all(input: &mut &[u8]) -> Result<T, Error>

Decode Self and consume all of the given input data. Read more
source§

impl<T> DecodeLimit for Twhere T: Decode,

source§

fn decode_all_with_depth_limit( limit: u32, input: &mut &[u8] ) -> Result<T, Error>

Decode Self and consume all of the given input data. Read more
source§

fn decode_with_depth_limit<I>(limit: u32, input: &mut I) -> Result<T, Error>where I: Input,

Decode Self with the given maximum recursion depth and advance input by the number of bytes consumed. Read more
source§

impl<T> Downcast for Twhere T: Any,

source§

fn into_any(self: Box<T, Global>) -> Box<dyn Any, Global>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
source§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
source§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
source§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
source§

impl<T> DowncastSync for Twhere T: Any + Send + Sync,

source§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> DynClone for Twhere T: Clone,

source§

fn __clone_box(&self, _: Private) -> *mut ()

source§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
source§

impl<T> FmtForward for T

source§

fn fmt_binary(self) -> FmtBinary<Self>where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
source§

fn fmt_display(self) -> FmtDisplay<Self>where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
source§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
source§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
source§

fn fmt_octal(self) -> FmtOctal<Self>where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
source§

fn fmt_pointer(self) -> FmtPointer<Self>where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
source§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
source§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
source§

fn fmt_list(self) -> FmtList<Self>where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Hashable for Twhere T: Codec,

source§

fn blake2_128(&self) -> [u8; 16]

source§

fn blake2_256(&self) -> [u8; 32]

source§

fn blake2_128_concat(&self) -> Vec<u8, Global>

source§

fn twox_128(&self) -> [u8; 16]

source§

fn twox_256(&self) -> [u8; 32]

source§

fn twox_64_concat(&self) -> Vec<u8, Global>

source§

fn identity(&self) -> Vec<u8, Global>

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IsType<T> for T

source§

fn from_ref(t: &T) -> &T

Cast reference.
source§

fn into_ref(&self) -> &T

Cast reference.
source§

fn from_mut(t: &mut T) -> &mut T

Cast mutable reference.
source§

fn into_mut(&mut self) -> &mut T

Cast mutable reference.
source§

impl<T, Outer> IsWrappedBy<Outer> for Twhere Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

source§

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

source§

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

source§

impl<T> KeyedVec for Twhere T: Codec,

source§

fn to_keyed_vec(&self, prepend_key: &[u8]) -> Vec<u8, Global>

Return an encoding of Self prepended by given slice.
source§

impl<T> Pipe for Twhere T: ?Sized,

source§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
source§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
source§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
source§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
source§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> Rwhere Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
source§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
source§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
source§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> Rwhere Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
source§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> Rwhere Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
source§

impl<T> Pointable for T

source§

const ALIGN: usize = mem::align_of::<T>()

The alignment of pointer.
§

type Init = T

The type for initializers.
source§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
source§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
source§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
source§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
source§

impl<T> SaturatedConversion for T

source§

fn saturated_from<T>(t: T) -> Selfwhere Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more
source§

fn saturated_into<T>(self) -> Twhere Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more
source§

impl<T> Tap for T

source§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
source§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
source§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
source§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
source§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
source§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
source§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
source§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
source§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
source§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
source§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
source§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
source§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
source§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
source§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
source§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> TryConv for T

source§

fn try_conv<T>(self) -> Result<T, Self::Error>where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<S, T> UncheckedInto<T> for Swhere T: UncheckedFrom<S>,

source§

fn unchecked_into(self) -> T

The counterpart to unchecked_from.
source§

impl<T, S> UniqueSaturatedInto<T> for Swhere T: Bounded, S: TryInto<T>,

source§

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.
source§

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

source§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

impl<S> Codec for Swhere S: Decode + Encode,

source§

impl<T> EncodeLike<&&T> for Twhere T: Encode,

source§

impl<T> EncodeLike<&T> for Twhere T: Encode,

source§

impl<T> EncodeLike<&mut T> for Twhere T: Encode,

source§

impl<T> EncodeLike<Arc<T>> for Twhere T: Encode,

source§

impl<T> EncodeLike<Box<T, Global>> for Twhere T: Encode,

source§

impl<'a, T> EncodeLike<Cow<'a, T>> for Twhere T: ToOwned + Encode,

source§

impl<T> EncodeLike<Rc<T>> for Twhere T: Encode,

source§

impl<S> FullCodec for Swhere S: Decode + FullEncode,

source§

impl<S> FullEncode for Swhere S: Encode + EncodeLike<S>,

source§

impl<T> MaybeDebug for Twhere T: Debug,

source§

impl<T> MaybeDebug for Twhere T: Debug,

source§

impl<T> MaybeRefUnwindSafe for Twhere T: RefUnwindSafe,

source§

impl<T> Member for Twhere T: Send + Sync + Debug + Eq + PartialEq<T> + Clone + 'static,

source§

impl<T> Parameter for Twhere T: Codec + EncodeLike<T> + Clone + Eq + Debug + TypeInfo,

source§

impl<T> StaticTypeInfo for Twhere T: TypeInfo + 'static,