pub struct AllowStdIo<T>(_);
Expand description

A simple wrapper type which allows types which implement only implement std::io::Read or std::io::Write to be used in contexts which expect an AsyncRead or AsyncWrite.

If these types issue an error with the kind io::ErrorKind::WouldBlock, it is expected that they will notify the current task on readiness. Synchronous std types should not issue errors of this kind and are safe to use in this context. However, using these types with AllowStdIo will cause the event loop to block, so they should be used with care.

Implementations§

source§

impl<T> AllowStdIo<T>

source

pub fn new(io: T) -> AllowStdIo<T>

Creates a new AllowStdIo from an existing IO object.

source

pub fn get_ref(&self) -> &T

Returns a reference to the contained IO object.

source

pub fn get_mut(&mut self) -> &mut T

Returns a mutable reference to the contained IO object.

source

pub fn into_inner(self) -> T

Consumes self and returns the contained IO object.

Trait Implementations§

source§

impl<T> AsyncBufRead for AllowStdIo<T>where T: BufRead,

source§

fn poll_fill_buf( self: Pin<&mut AllowStdIo<T>>, _: &mut Context<'_> ) -> Poll<Result<&[u8], Error>>

Attempt to return the contents of the internal buffer, filling it with more data from the inner reader if it is empty. Read more
source§

fn consume(self: Pin<&mut AllowStdIo<T>>, amt: usize)

Tells this buffer that amt bytes have been consumed from the buffer, so they should no longer be returned in calls to poll_read. Read more
source§

impl<T> AsyncRead for AllowStdIo<T>where T: Read,

source§

fn poll_read( self: Pin<&mut AllowStdIo<T>>, _: &mut Context<'_>, buf: &mut [u8] ) -> Poll<Result<usize, Error>>

Attempt to read from the AsyncRead into buf. Read more
source§

fn poll_read_vectored( self: Pin<&mut AllowStdIo<T>>, _: &mut Context<'_>, bufs: &mut [IoSliceMut<'_>] ) -> Poll<Result<usize, Error>>

Attempt to read from the AsyncRead into bufs using vectored IO operations. Read more
source§

impl<T> AsyncSeek for AllowStdIo<T>where T: Seek,

source§

fn poll_seek( self: Pin<&mut AllowStdIo<T>>, _: &mut Context<'_>, pos: SeekFrom ) -> Poll<Result<u64, Error>>

Attempt to seek to an offset, in bytes, in a stream. Read more
source§

impl<T> AsyncWrite for AllowStdIo<T>where T: Write,

source§

fn poll_write( self: Pin<&mut AllowStdIo<T>>, _: &mut Context<'_>, buf: &[u8] ) -> Poll<Result<usize, Error>>

Attempt to write bytes from buf into the object. Read more
source§

fn poll_write_vectored( self: Pin<&mut AllowStdIo<T>>, _: &mut Context<'_>, bufs: &[IoSlice<'_>] ) -> Poll<Result<usize, Error>>

Attempt to write bytes from bufs into the object using vectored IO operations. Read more
source§

fn poll_flush( self: Pin<&mut AllowStdIo<T>>, _: &mut Context<'_> ) -> Poll<Result<(), Error>>

Attempt to flush the object, ensuring that any buffered data reach their destination. Read more
source§

fn poll_close( self: Pin<&mut AllowStdIo<T>>, cx: &mut Context<'_> ) -> Poll<Result<(), Error>>

Attempt to close the object. Read more
source§

impl<T> BufRead for AllowStdIo<T>where T: BufRead,

source§

fn fill_buf(&mut self) -> Result<&[u8], Error>

Returns the contents of the internal buffer, filling it with more data from the inner reader if it is empty. Read more
source§

fn consume(&mut self, amt: usize)

Tells this buffer that amt bytes have been consumed from the buffer, so they should no longer be returned in calls to read. Read more
source§

fn has_data_left(&mut self) -> Result<bool, Error>

🔬This is a nightly-only experimental API. (buf_read_has_data_left)
Check if the underlying Read has any data left to be read. Read more
1.0.0 · source§

fn read_until( &mut self, byte: u8, buf: &mut Vec<u8, Global> ) -> Result<usize, Error>

Read all bytes into buf until the delimiter byte or EOF is reached. Read more
1.0.0 · source§

fn read_line(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until a newline (the 0xA byte) is reached, and append them to the provided String buffer. Read more
1.0.0 · source§

fn split(self, byte: u8) -> Split<Self>where Self: Sized,

Returns an iterator over the contents of this reader split on the byte byte. Read more
1.0.0 · source§

fn lines(self) -> Lines<Self>where Self: Sized,

Returns an iterator over the lines of this reader. Read more
source§

impl<T> Clone for AllowStdIo<T>where T: Clone,

source§

fn clone(&self) -> AllowStdIo<T>

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl<T> Debug for AllowStdIo<T>where T: Debug,

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl<T> Hash for AllowStdIo<T>where T: Hash,

source§

fn hash<__H>(&self, state: &mut __H)where __H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl<T> Ord for AllowStdIo<T>where T: Ord,

source§

fn cmp(&self, other: &AllowStdIo<T>) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval. Read more
source§

impl<T> PartialEq<AllowStdIo<T>> for AllowStdIo<T>where T: PartialEq<T>,

source§

fn eq(&self, other: &AllowStdIo<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<T> PartialOrd<AllowStdIo<T>> for AllowStdIo<T>where T: PartialOrd<T>,

source§

fn partial_cmp(&self, other: &AllowStdIo<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl<T> Read for AllowStdIo<T>where T: Read,

source§

fn read(&mut self, buf: &mut [u8]) -> Result<usize, Error>

Pull some bytes from this source into the specified buffer, returning how many bytes were read. Read more
source§

fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize, Error>

Like read, except that it reads into a slice of buffers. Read more
source§

fn read_to_end(&mut self, buf: &mut Vec<u8, Global>) -> Result<usize, Error>

Read all bytes until EOF in this source, placing them into buf. Read more
source§

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until EOF in this source, appending them to buf. Read more
source§

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Read the exact number of bytes required to fill buf. Read more
source§

fn is_read_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector)
Determines if this Reader has an efficient read_vectored implementation. Read more
source§

fn read_buf(&mut self, buf: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)
Pull some bytes from this source into the specified buffer. Read more
source§

fn read_buf_exact(&mut self, cursor: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)
Read the exact number of bytes required to fill cursor. Read more
1.0.0 · source§

fn by_ref(&mut self) -> &mut Selfwhere Self: Sized,

Creates a “by reference” adaptor for this instance of Read. Read more
1.0.0 · source§

fn bytes(self) -> Bytes<Self>where Self: Sized,

Transforms this Read instance to an Iterator over its bytes. Read more
1.0.0 · source§

fn chain<R>(self, next: R) -> Chain<Self, R>where R: Read, Self: Sized,

Creates an adapter which will chain this stream with another. Read more
1.0.0 · source§

fn take(self, limit: u64) -> Take<Self>where Self: Sized,

Creates an adapter which will read at most limit bytes from it. Read more
source§

impl<T> Seek for AllowStdIo<T>where T: Seek,

source§

fn seek(&mut self, pos: SeekFrom) -> Result<u64, Error>

Seek to an offset, in bytes, in a stream. Read more
1.55.0 · source§

fn rewind(&mut self) -> Result<(), Error>

Rewind to the beginning of a stream. Read more
source§

fn stream_len(&mut self) -> Result<u64, Error>

🔬This is a nightly-only experimental API. (seek_stream_len)
Returns the length of this stream (in bytes). Read more
1.51.0 · source§

fn stream_position(&mut self) -> Result<u64, Error>

Returns the current seek position from the start of the stream. Read more
source§

impl<T> Write for AllowStdIo<T>where T: Write,

source§

fn write(&mut self, buf: &[u8]) -> Result<usize, Error>

Write a buffer into this writer, returning how many bytes were written. Read more
source§

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize, Error>

Like write, except that it writes from a slice of buffers. Read more
source§

fn flush(&mut self) -> Result<(), Error>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination. Read more
source§

fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>

Attempts to write an entire buffer into this writer. Read more
source§

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<(), Error>

Writes a formatted string into this writer, returning any error encountered. Read more
source§

fn is_write_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector)
Determines if this Writer has an efficient write_vectored implementation. Read more
source§

fn write_all_vectored(&mut self, bufs: &mut [IoSlice<'_>]) -> Result<(), Error>

🔬This is a nightly-only experimental API. (write_all_vectored)
Attempts to write multiple buffers into this writer. Read more
1.0.0 · source§

fn by_ref(&mut self) -> &mut Selfwhere Self: Sized,

Creates a “by reference” adapter for this instance of Write. Read more
source§

impl<T> Copy for AllowStdIo<T>where T: Copy,

source§

impl<T> Eq for AllowStdIo<T>where T: Eq,

source§

impl<T> StructuralEq for AllowStdIo<T>

source§

impl<T> StructuralPartialEq for AllowStdIo<T>

source§

impl<T> Unpin for AllowStdIo<T>

Auto Trait Implementations§

§

impl<T> RefUnwindSafe for AllowStdIo<T>where T: RefUnwindSafe,

§

impl<T> Send for AllowStdIo<T>where T: Send,

§

impl<T> Sync for AllowStdIo<T>where T: Sync,

§

impl<T> UnwindSafe for AllowStdIo<T>where T: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Any for Twhere T: Any,

source§

fn into_any(self: Box<T, Global>) -> Box<dyn Any, Global>

source§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

source§

fn type_name(&self) -> &'static str

source§

impl<T> AnySync for Twhere T: Any + Send + Sync,

source§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

source§

impl<R> AsyncBufReadExt for Rwhere R: AsyncBufRead + ?Sized,

source§

fn fill_buf(&mut self) -> FillBuf<'_, Self> where Self: Unpin,

Creates a future which will wait for a non-empty buffer to be available from this I/O object or EOF to be reached. Read more
source§

fn consume_unpin(&mut self, amt: usize)where Self: Unpin,

A convenience for calling AsyncBufRead::consume on Unpin IO types. Read more
source§

fn read_until<'a>( &'a mut self, byte: u8, buf: &'a mut Vec<u8, Global> ) -> ReadUntil<'a, Self> where Self: Unpin,

Creates a future which will read all the bytes associated with this I/O object into buf until the delimiter byte or EOF is reached. This method is the async equivalent to BufRead::read_until. Read more
source§

fn read_line<'a>(&'a mut self, buf: &'a mut String) -> ReadLine<'a, Self> where Self: Unpin,

Creates a future which will read all the bytes associated with this I/O object into buf until a newline (the 0xA byte) or EOF is reached, This method is the async equivalent to BufRead::read_line. Read more
source§

fn lines(self) -> Lines<Self>where Self: Sized,

Returns a stream over the lines of this reader. This method is the async equivalent to BufRead::lines. Read more
source§

impl<R> AsyncBufReadExt for Rwhere R: AsyncBufRead + ?Sized,

source§

fn fill_buf(&mut self) -> FillBuf<'_, Self> where Self: Unpin,

Returns the contents of the internal buffer, filling it with more data if empty. Read more
source§

fn consume(&mut self, amt: usize)where Self: Unpin,

Consumes amt buffered bytes. Read more
source§

fn read_until<'a>( &'a mut self, byte: u8, buf: &'a mut Vec<u8, Global> ) -> ReadUntilFuture<'a, Self> where Self: Unpin,

Reads all bytes and appends them into buf until the delimiter byte or EOF is found. Read more
source§

fn read_line<'a>(&'a mut self, buf: &'a mut String) -> ReadLineFuture<'a, Self> where Self: Unpin,

Reads all bytes and appends them into buf until a newline (the 0xA byte) or EOF is found. Read more
source§

fn lines(self) -> Lines<Self>where Self: Unpin + Sized,

Returns a stream over the lines of this byte stream. Read more
source§

fn split(self, byte: u8) -> Split<Self>where Self: Sized,

Returns a stream over the contents of this reader split on the specified byte. Read more
source§

impl<R> AsyncReadExt for Rwhere R: AsyncRead + ?Sized,

source§

fn chain<R>(self, next: R) -> Chain<Self, R>where Self: Sized, R: AsyncRead,

Creates an adaptor which will chain this stream with another. Read more
source§

fn read<'a>(&'a mut self, buf: &'a mut [u8]) -> Read<'a, Self> where Self: Unpin,

Tries to read some bytes directly into the given buf in asynchronous manner, returning a future type. Read more
source§

fn read_vectored<'a>( &'a mut self, bufs: &'a mut [IoSliceMut<'a>] ) -> ReadVectored<'a, Self> where Self: Unpin,

Creates a future which will read from the AsyncRead into bufs using vectored IO operations. Read more
source§

fn read_exact<'a>(&'a mut self, buf: &'a mut [u8]) -> ReadExact<'a, Self> where Self: Unpin,

Creates a future which will read exactly enough bytes to fill buf, returning an error if end of file (EOF) is hit sooner. Read more
source§

fn read_to_end<'a>( &'a mut self, buf: &'a mut Vec<u8, Global> ) -> ReadToEnd<'a, Self> where Self: Unpin,

Creates a future which will read all the bytes from this AsyncRead. Read more
source§

fn read_to_string<'a>( &'a mut self, buf: &'a mut String ) -> ReadToString<'a, Self> where Self: Unpin,

Creates a future which will read all the bytes from this AsyncRead. Read more
source§

fn split(self) -> (ReadHalf<Self>, WriteHalf<Self>)where Self: AsyncWrite + Sized,

Helper method for splitting this read/write object into two halves. Read more
source§

fn take(self, limit: u64) -> Take<Self>where Self: Sized,

Creates an AsyncRead adapter which will read at most limit bytes from the underlying reader. Read more
source§

impl<R> AsyncReadExt for Rwhere R: AsyncRead + ?Sized,

source§

fn read<'a>(&'a mut self, buf: &'a mut [u8]) -> ReadFuture<'a, Self> where Self: Unpin,

Reads some bytes from the byte stream. Read more
source§

fn read_vectored<'a>( &'a mut self, bufs: &'a mut [IoSliceMut<'a>] ) -> ReadVectoredFuture<'a, Self> where Self: Unpin,

Like read(), except it reads into a slice of buffers. Read more
source§

fn read_to_end<'a>( &'a mut self, buf: &'a mut Vec<u8, Global> ) -> ReadToEndFuture<'a, Self> where Self: Unpin,

Reads the entire contents and appends them to a Vec. Read more
source§

fn read_to_string<'a>( &'a mut self, buf: &'a mut String ) -> ReadToStringFuture<'a, Self> where Self: Unpin,

Reads the entire contents and appends them to a String. Read more
source§

fn read_exact<'a>(&'a mut self, buf: &'a mut [u8]) -> ReadExactFuture<'a, Self> where Self: Unpin,

Reads the exact number of bytes required to fill buf. Read more
source§

fn take(self, limit: u64) -> Take<Self>where Self: Sized,

Creates an adapter which will read at most limit bytes from it. Read more
source§

fn bytes(self) -> Bytes<Self>where Self: Sized,

Converts this AsyncRead into a Stream of bytes. Read more
source§

fn chain<R>(self, next: R) -> Chain<Self, R>where R: AsyncRead, Self: Sized,

Creates an adapter which will chain this stream with another. Read more
source§

fn boxed_reader<'a>(self) -> Pin<Box<dyn AsyncRead + Send + 'a, Global>>where Self: Sized + Send + 'a,

Boxes the reader and changes its type to dyn AsyncRead + Send + 'a. Read more
source§

impl<S> AsyncSeekExt for Swhere S: AsyncSeek + ?Sized,

source§

fn seek(&mut self, pos: SeekFrom) -> Seek<'_, Self> where Self: Unpin,

Creates a future which will seek an IO object, and then yield the new position in the object and the object itself. Read more
source§

fn stream_position(&mut self) -> Seek<'_, Self> where Self: Unpin,

Creates a future which will return the current seek position from the start of the stream. Read more
source§

impl<S> AsyncSeekExt for Swhere S: AsyncSeek + ?Sized,

source§

fn seek(&mut self, pos: SeekFrom) -> SeekFuture<'_, Self> where Self: Unpin,

Seeks to a new position in a byte stream. Read more
source§

impl<W> AsyncWriteExt for Wwhere W: AsyncWrite + ?Sized,

source§

fn flush(&mut self) -> Flush<'_, Self> where Self: Unpin,

Creates a future which will entirely flush this AsyncWrite. Read more
source§

fn close(&mut self) -> Close<'_, Self> where Self: Unpin,

Creates a future which will entirely close this AsyncWrite.
source§

fn write<'a>(&'a mut self, buf: &'a [u8]) -> Write<'a, Self> where Self: Unpin,

Creates a future which will write bytes from buf into the object. Read more
source§

fn write_vectored<'a>( &'a mut self, bufs: &'a [IoSlice<'a>] ) -> WriteVectored<'a, Self> where Self: Unpin,

Creates a future which will write bytes from bufs into the object using vectored IO operations. Read more
source§

fn write_all<'a>(&'a mut self, buf: &'a [u8]) -> WriteAll<'a, Self> where Self: Unpin,

Write data into this object. Read more
source§

fn into_sink<Item>(self) -> IntoSink<Self, Item>where Item: AsRef<[u8]>, Self: Sized,

Allow using an AsyncWrite as a Sink<Item: AsRef<[u8]>>. Read more
source§

impl<W> AsyncWriteExt for Wwhere W: AsyncWrite + ?Sized,

source§

fn write<'a>(&'a mut self, buf: &'a [u8]) -> WriteFuture<'a, Self> where Self: Unpin,

Writes some bytes into the byte stream. Read more
source§

fn write_vectored<'a>( &'a mut self, bufs: &'a [IoSlice<'a>] ) -> WriteVectoredFuture<'a, Self> where Self: Unpin,

Like write(), except that it writes a slice of buffers. Read more
source§

fn write_all<'a>(&'a mut self, buf: &'a [u8]) -> WriteAllFuture<'a, Self> where Self: Unpin,

Writes an entire buffer into the byte stream. Read more
source§

fn flush(&mut self) -> FlushFuture<'_, Self> where Self: Unpin,

Flushes the stream to ensure that all buffered contents reach their destination. Read more
source§

fn close(&mut self) -> CloseFuture<'_, Self> where Self: Unpin,

Closes the writer. Read more
source§

fn boxed_writer<'a>(self) -> Pin<Box<dyn AsyncWrite + Send + 'a, Global>>where Self: Sized + Send + 'a,

Boxes the writer and changes its type to dyn AsyncWrite + Send + 'a. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<B> BufReadExt for Bwhere B: BufRead,

source§

fn byte_lines(self) -> ByteLines<Self>where Self: Sized,

Returns an iterator over the lines of this reader, where each line is represented as a byte string. Read more
source§

fn byte_records(self, terminator: u8) -> ByteRecords<Self>where Self: Sized,

Returns an iterator over byte-terminated records of this reader, where each record is represented as a byte string. Read more
source§

fn for_byte_line<F>(&mut self, for_each_line: F) -> Result<(), Error>where Self: Sized, F: FnMut(&[u8]) -> Result<bool, Error>,

Executes the given closure on each line in the underlying reader. Read more
source§

fn for_byte_record<F>( &mut self, terminator: u8, for_each_record: F ) -> Result<(), Error>where Self: Sized, F: FnMut(&[u8]) -> Result<bool, Error>,

Executes the given closure on each byte-terminated record in the underlying reader. Read more
source§

fn for_byte_line_with_terminator<F>( &mut self, for_each_line: F ) -> Result<(), Error>where Self: Sized, F: FnMut(&[u8]) -> Result<bool, Error>,

Executes the given closure on each line in the underlying reader. Read more
source§

fn for_byte_record_with_terminator<F>( &mut self, terminator: u8, for_each_record: F ) -> Result<(), Error>where Self: Sized, F: FnMut(&[u8]) -> Result<bool, Error>,

Executes the given closure on each byte-terminated record in the underlying reader. Read more
source§

impl<T> CallHasher for Twhere T: Hash + ?Sized,

source§

default fn get_hash<H, B>(value: &H, build_hasher: &B) -> u64where H: Hash + ?Sized, B: BuildHasher,

source§

impl<T> CheckedConversion for T

source§

fn checked_from<T>(t: T) -> Option<Self>where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more
source§

fn checked_into<T>(self) -> Option<T>where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more
source§

impl<T> Conv for T

source§

fn conv<T>(self) -> Twhere Self: Into<T>,

Converts self into T using Into<T>. Read more
source§

impl<T> DefensiveMax<T> for Twhere T: PartialOrd<T>,

source§

fn defensive_max(self, other: T) -> T

Returns the maximum and defensively asserts that other is not larger than self. Read more
source§

fn defensive_strict_max(self, other: T) -> T

Returns the maximum and defensively asserts that other is smaller than self. Read more
source§

impl<T> DefensiveMin<T> for Twhere T: PartialOrd<T>,

source§

fn defensive_min(self, other: T) -> T

Returns the minimum and defensively checks that self is not larger than other. Read more
source§

fn defensive_strict_min(self, other: T) -> T

Returns the minimum and defensively checks that self is smaller than other. Read more
source§

impl<T> Downcast for Twhere T: Any,

source§

fn into_any(self: Box<T, Global>) -> Box<dyn Any, Global>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
source§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
source§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
source§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
source§

impl<T> DowncastSync for Twhere T: Any + Send + Sync,

source§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> DynClone for Twhere T: Clone,

source§

fn __clone_box(&self, _: Private) -> *mut ()

source§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
source§

impl<R> FixedIntReader for Rwhere R: Read,

source§

fn read_fixedint<FI>(&mut self) -> Result<FI, Error>where FI: FixedInt,

Read a fixed integer from a reader. How many bytes are read depends on FI. Read more
source§

impl<W> FixedIntWriter for Wwhere W: Write,

source§

fn write_fixedint<FI>(&mut self, n: FI) -> Result<usize, Error>where FI: FixedInt,

source§

impl<T> FmtForward for T

source§

fn fmt_binary(self) -> FmtBinary<Self>where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
source§

fn fmt_display(self) -> FmtDisplay<Self>where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
source§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
source§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
source§

fn fmt_octal(self) -> FmtOctal<Self>where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
source§

fn fmt_pointer(self) -> FmtPointer<Self>where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
source§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
source§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
source§

fn fmt_list(self) -> FmtList<Self>where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> FuturesAsyncReadCompatExt for Twhere T: AsyncRead,

source§

fn compat(self) -> Compat<Self>where Self: Sized,

Wraps self with a compatibility layer that implements tokio_io::AsyncRead.
source§

impl<T> FuturesAsyncWriteCompatExt for Twhere T: AsyncWrite,

source§

fn compat_write(self) -> Compat<Self>where Self: Sized,

Wraps self with a compatibility layer that implements tokio::io::AsyncWrite.
source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IsType<T> for T

source§

fn from_ref(t: &T) -> &T

Cast reference.
source§

fn into_ref(&self) -> &T

Cast reference.
source§

fn from_mut(t: &mut T) -> &mut T

Cast mutable reference.
source§

fn into_mut(&mut self) -> &mut T

Cast mutable reference.
source§

impl<T, Outer> IsWrappedBy<Outer> for Twhere Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

source§

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

source§

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

source§

impl<W> Output for Wwhere W: Write,

source§

fn write(&mut self, bytes: &[u8])

Write to the output.
source§

fn push_byte(&mut self, byte: u8)

Write a single byte to the output.
source§

impl<T> Pipe for Twhere T: ?Sized,

source§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
source§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
source§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
source§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
source§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> Rwhere Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
source§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
source§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
source§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> Rwhere Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
source§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> Rwhere Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
source§

impl<T> Pointable for T

source§

const ALIGN: usize = mem::align_of::<T>()

The alignment of pointer.
§

type Init = T

The type for initializers.
source§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
source§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
source§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
source§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<R> ReadBytesExt for Rwhere R: Read + ?Sized,

source§

fn read_u8(&mut self) -> Result<u8, Error>

Reads an unsigned 8 bit integer from the underlying reader. Read more
source§

fn read_i8(&mut self) -> Result<i8, Error>

Reads a signed 8 bit integer from the underlying reader. Read more
source§

fn read_u16<T>(&mut self) -> Result<u16, Error>where T: ByteOrder,

Reads an unsigned 16 bit integer from the underlying reader. Read more
source§

fn read_i16<T>(&mut self) -> Result<i16, Error>where T: ByteOrder,

Reads a signed 16 bit integer from the underlying reader. Read more
source§

fn read_u24<T>(&mut self) -> Result<u32, Error>where T: ByteOrder,

Reads an unsigned 24 bit integer from the underlying reader. Read more
source§

fn read_i24<T>(&mut self) -> Result<i32, Error>where T: ByteOrder,

Reads a signed 24 bit integer from the underlying reader. Read more
source§

fn read_u32<T>(&mut self) -> Result<u32, Error>where T: ByteOrder,

Reads an unsigned 32 bit integer from the underlying reader. Read more
source§

fn read_i32<T>(&mut self) -> Result<i32, Error>where T: ByteOrder,

Reads a signed 32 bit integer from the underlying reader. Read more
source§

fn read_u48<T>(&mut self) -> Result<u64, Error>where T: ByteOrder,

Reads an unsigned 48 bit integer from the underlying reader. Read more
source§

fn read_i48<T>(&mut self) -> Result<i64, Error>where T: ByteOrder,

Reads a signed 48 bit integer from the underlying reader. Read more
source§

fn read_u64<T>(&mut self) -> Result<u64, Error>where T: ByteOrder,

Reads an unsigned 64 bit integer from the underlying reader. Read more
source§

fn read_i64<T>(&mut self) -> Result<i64, Error>where T: ByteOrder,

Reads a signed 64 bit integer from the underlying reader. Read more
source§

fn read_u128<T>(&mut self) -> Result<u128, Error>where T: ByteOrder,

Reads an unsigned 128 bit integer from the underlying reader. Read more
source§

fn read_i128<T>(&mut self) -> Result<i128, Error>where T: ByteOrder,

Reads a signed 128 bit integer from the underlying reader. Read more
source§

fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error>where T: ByteOrder,

Reads an unsigned n-bytes integer from the underlying reader. Read more
source§

fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error>where T: ByteOrder,

Reads a signed n-bytes integer from the underlying reader. Read more
source§

fn read_uint128<T>(&mut self, nbytes: usize) -> Result<u128, Error>where T: ByteOrder,

Reads an unsigned n-bytes integer from the underlying reader.
source§

fn read_int128<T>(&mut self, nbytes: usize) -> Result<i128, Error>where T: ByteOrder,

Reads a signed n-bytes integer from the underlying reader.
source§

fn read_f32<T>(&mut self) -> Result<f32, Error>where T: ByteOrder,

Reads a IEEE754 single-precision (4 bytes) floating point number from the underlying reader. Read more
source§

fn read_f64<T>(&mut self) -> Result<f64, Error>where T: ByteOrder,

Reads a IEEE754 double-precision (8 bytes) floating point number from the underlying reader. Read more
source§

fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error>where T: ByteOrder,

Reads a sequence of unsigned 16 bit integers from the underlying reader. Read more
source§

fn read_u32_into<T>(&mut self, dst: &mut [u32]) -> Result<(), Error>where T: ByteOrder,

Reads a sequence of unsigned 32 bit integers from the underlying reader. Read more
source§

fn read_u64_into<T>(&mut self, dst: &mut [u64]) -> Result<(), Error>where T: ByteOrder,

Reads a sequence of unsigned 64 bit integers from the underlying reader. Read more
source§

fn read_u128_into<T>(&mut self, dst: &mut [u128]) -> Result<(), Error>where T: ByteOrder,

Reads a sequence of unsigned 128 bit integers from the underlying reader. Read more
source§

fn read_i8_into(&mut self, dst: &mut [i8]) -> Result<(), Error>

Reads a sequence of signed 8 bit integers from the underlying reader. Read more
source§

fn read_i16_into<T>(&mut self, dst: &mut [i16]) -> Result<(), Error>where T: ByteOrder,

Reads a sequence of signed 16 bit integers from the underlying reader. Read more
source§

fn read_i32_into<T>(&mut self, dst: &mut [i32]) -> Result<(), Error>where T: ByteOrder,

Reads a sequence of signed 32 bit integers from the underlying reader. Read more
source§

fn read_i64_into<T>(&mut self, dst: &mut [i64]) -> Result<(), Error>where T: ByteOrder,

Reads a sequence of signed 64 bit integers from the underlying reader. Read more
source§

fn read_i128_into<T>(&mut self, dst: &mut [i128]) -> Result<(), Error>where T: ByteOrder,

Reads a sequence of signed 128 bit integers from the underlying reader. Read more
source§

fn read_f32_into<T>(&mut self, dst: &mut [f32]) -> Result<(), Error>where T: ByteOrder,

Reads a sequence of IEEE754 single-precision (4 bytes) floating point numbers from the underlying reader. Read more
source§

fn read_f32_into_unchecked<T>(&mut self, dst: &mut [f32]) -> Result<(), Error>where T: ByteOrder,

👎Deprecated since 1.2.0: please use read_f32_into instead
DEPRECATED. Read more
source§

fn read_f64_into<T>(&mut self, dst: &mut [f64]) -> Result<(), Error>where T: ByteOrder,

Reads a sequence of IEEE754 double-precision (8 bytes) floating point numbers from the underlying reader. Read more
source§

fn read_f64_into_unchecked<T>(&mut self, dst: &mut [f64]) -> Result<(), Error>where T: ByteOrder,

👎Deprecated since 1.2.0: please use read_f64_into instead
DEPRECATED. Read more
source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
source§

impl<T> SaturatedConversion for T

source§

fn saturated_from<T>(t: T) -> Selfwhere Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more
source§

fn saturated_into<T>(self) -> Twhere Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more
source§

impl<T> Tap for T

source§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
source§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
source§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
source§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
source§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
source§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
source§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
source§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
source§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
source§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
source§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
source§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
source§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
source§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
source§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
source§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> TryConv for T

source§

fn try_conv<T>(self) -> Result<T, Self::Error>where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<S, T> UncheckedInto<T> for Swhere T: UncheckedFrom<S>,

source§

fn unchecked_into(self) -> T

The counterpart to unchecked_from.
source§

impl<T, S> UniqueSaturatedInto<T> for Swhere T: Bounded, S: TryInto<T>,

source§

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.
source§

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

source§

fn vzip(self) -> V

source§

impl<R> VarIntReader for Rwhere R: Read,

source§

fn read_varint<VI>(&mut self) -> Result<VI, Error>where VI: VarInt,

Returns either the decoded integer, or an error. Read more
source§

impl<Inner> VarIntWriter for Innerwhere Inner: Write,

source§

fn write_varint<VI>(&mut self, n: VI) -> Result<usize, Error>where VI: VarInt,

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

impl<W> WriteBytesExt for Wwhere W: Write + ?Sized,

source§

fn write_u8(&mut self, n: u8) -> Result<(), Error>

Writes an unsigned 8 bit integer to the underlying writer. Read more
source§

fn write_i8(&mut self, n: i8) -> Result<(), Error>

Writes a signed 8 bit integer to the underlying writer. Read more
source§

fn write_u16<T>(&mut self, n: u16) -> Result<(), Error>where T: ByteOrder,

Writes an unsigned 16 bit integer to the underlying writer. Read more
source§

fn write_i16<T>(&mut self, n: i16) -> Result<(), Error>where T: ByteOrder,

Writes a signed 16 bit integer to the underlying writer. Read more
source§

fn write_u24<T>(&mut self, n: u32) -> Result<(), Error>where T: ByteOrder,

Writes an unsigned 24 bit integer to the underlying writer. Read more
source§

fn write_i24<T>(&mut self, n: i32) -> Result<(), Error>where T: ByteOrder,

Writes a signed 24 bit integer to the underlying writer. Read more
source§

fn write_u32<T>(&mut self, n: u32) -> Result<(), Error>where T: ByteOrder,

Writes an unsigned 32 bit integer to the underlying writer. Read more
source§

fn write_i32<T>(&mut self, n: i32) -> Result<(), Error>where T: ByteOrder,

Writes a signed 32 bit integer to the underlying writer. Read more
source§

fn write_u48<T>(&mut self, n: u64) -> Result<(), Error>where T: ByteOrder,

Writes an unsigned 48 bit integer to the underlying writer. Read more
source§

fn write_i48<T>(&mut self, n: i64) -> Result<(), Error>where T: ByteOrder,

Writes a signed 48 bit integer to the underlying writer. Read more
source§

fn write_u64<T>(&mut self, n: u64) -> Result<(), Error>where T: ByteOrder,

Writes an unsigned 64 bit integer to the underlying writer. Read more
source§

fn write_i64<T>(&mut self, n: i64) -> Result<(), Error>where T: ByteOrder,

Writes a signed 64 bit integer to the underlying writer. Read more
source§

fn write_u128<T>(&mut self, n: u128) -> Result<(), Error>where T: ByteOrder,

Writes an unsigned 128 bit integer to the underlying writer.
source§

fn write_i128<T>(&mut self, n: i128) -> Result<(), Error>where T: ByteOrder,

Writes a signed 128 bit integer to the underlying writer.
source§

fn write_uint<T>(&mut self, n: u64, nbytes: usize) -> Result<(), Error>where T: ByteOrder,

Writes an unsigned n-bytes integer to the underlying writer. Read more
source§

fn write_int<T>(&mut self, n: i64, nbytes: usize) -> Result<(), Error>where T: ByteOrder,

Writes a signed n-bytes integer to the underlying writer. Read more
source§

fn write_uint128<T>(&mut self, n: u128, nbytes: usize) -> Result<(), Error>where T: ByteOrder,

Writes an unsigned n-bytes integer to the underlying writer. Read more
source§

fn write_int128<T>(&mut self, n: i128, nbytes: usize) -> Result<(), Error>where T: ByteOrder,

Writes a signed n-bytes integer to the underlying writer. Read more
source§

fn write_f32<T>(&mut self, n: f32) -> Result<(), Error>where T: ByteOrder,

Writes a IEEE754 single-precision (4 bytes) floating point number to the underlying writer. Read more
source§

fn write_f64<T>(&mut self, n: f64) -> Result<(), Error>where T: ByteOrder,

Writes a IEEE754 double-precision (8 bytes) floating point number to the underlying writer. Read more
source§

impl<W> Writer for Wwhere W: Write,

source§

fn write(&mut self, slice: &[u8]) -> Result<(), Error>

Write the given DER-encoded bytes as output.
source§

fn write_byte(&mut self, byte: u8) -> Result<(), Error>

Write a single byte.
source§

impl<T> ExHashT for Twhere T: Hash + Eq + Debug + Clone + Send + Sync + 'static,

source§

impl<T> MaybeDebug for Twhere T: Debug,

source§

impl<T> MaybeDebug for Twhere T: Debug,

source§

impl<T> MaybeHash for Twhere T: Hash,

source§

impl<T> MaybeHash for Twhere T: Hash,

source§

impl<T> MaybeRefUnwindSafe for Twhere T: RefUnwindSafe,

source§

impl<T> MaybeSend for Twhere T: Send,

source§

impl<T> Member for Twhere T: Send + Sync + Debug + Eq + PartialEq<T> + Clone + 'static,

source§

impl<T> Sequence for Twhere T: Eq + Hash,

source§

impl<T> TReadTransport for Twhere T: Read,

source§

impl<T> TWriteTransport for Twhere T: Write,