Struct pallet_multisig::pallet::Pallet

pub struct Pallet<T>(_);

The pallet implementing the on-chain logic.

Implementations

impl<T: Config> Pallet<T>

pub fn as_multi_threshold_1( origin: OriginFor<T>, other_signatories: Vec<T::AccountId>, call: Box<<T as Config>::RuntimeCall> ) -> DispatchResultWithPostInfo

Immediately dispatch a multi-signature call using a single approval from the caller.

The dispatch origin for this call must be Signed.

• other_signatories: The accounts (other than the sender) who are part of the multi-signature, but do not participate in the approval process.
• call: The call to be executed.

Result is equivalent to the dispatched result.

O(Z + C) where Z is the length of the call and C its execution weight.

• DB Weight: None
• Plus Call Weight

pub fn as_multi( origin: OriginFor<T>, threshold: u16, other_signatories: Vec<T::AccountId>, maybe_timepoint: Option<Timepoint<T::BlockNumber>>, call: Box<<T as Config>::RuntimeCall>, max_weight: Weight ) -> DispatchResultWithPostInfo

Register approval for a dispatch to be made from a deterministic composite account if approved by a total of threshold - 1 of other_signatories.

If there are enough, then dispatch the call.

Payment: DepositBase will be reserved if this is the first approval, plus threshold times DepositFactor. It is returned once this dispatch happens or is cancelled.

The dispatch origin for this call must be Signed.

• threshold: The total number of approvals for this dispatch before it is executed.
• other_signatories: The accounts (other than the sender) who can approve this dispatch. May not be empty.
• maybe_timepoint: If this is the first approval, then this must be None. If it is not the first approval, then it must be Some, with the timepoint (block number and transaction index) of the first approval transaction.
• call: The call to be executed.

NOTE: Unless this is the final approval, you will generally want to use approve_as_multi instead, since it only requires a hash of the call.

Result is equivalent to the dispatched result if threshold is exactly 1. Otherwise on success, result is Ok and the result from the interior call, if it was executed, may be found in the deposited MultisigExecuted event.

• O(S + Z + Call).
• Up to one balance-reserve or unreserve operation.
• One passthrough operation, one insert, both O(S) where S is the number of signatories. S is capped by MaxSignatories, with weight being proportional.
• One call encode & hash, both of complexity O(Z) where Z is tx-len.
• One encode & hash, both of complexity O(S).
• Up to one binary search and insert (O(logS + S)).
• I/O: 1 read O(S), up to 1 mutate O(S). Up to one remove.
• One event.
• The weight of the call.
• Storage: inserts one item, value size bounded by MaxSignatories, with a deposit taken for its lifetime of DepositBase + threshold * DepositFactor.

---

• DB Weight:
  • Reads: Multisig Storage, [Caller Account]
  • Writes: Multisig Storage, [Caller Account]
• Plus Call Weight

pub fn approve_as_multi( origin: OriginFor<T>, threshold: u16, other_signatories: Vec<T::AccountId>, maybe_timepoint: Option<Timepoint<T::BlockNumber>>, call_hash: [u8; 32], max_weight: Weight ) -> DispatchResultWithPostInfo

Register approval for a dispatch to be made from a deterministic composite account if approved by a total of threshold - 1 of other_signatories.

Payment: DepositBase will be reserved if this is the first approval, plus threshold times DepositFactor. It is returned once this dispatch happens or is cancelled.

The dispatch origin for this call must be Signed.

• threshold: The total number of approvals for this dispatch before it is executed.
• other_signatories: The accounts (other than the sender) who can approve this dispatch. May not be empty.
• maybe_timepoint: If this is the first approval, then this must be None. If it is not the first approval, then it must be Some, with the timepoint (block number and transaction index) of the first approval transaction.
• call_hash: The hash of the call to be executed.

NOTE: If this is the final approval, you will want to use as_multi instead.

• O(S).
• Up to one balance-reserve or unreserve operation.
• One passthrough operation, one insert, both O(S) where S is the number of signatories. S is capped by MaxSignatories, with weight being proportional.
• One encode & hash, both of complexity O(S).
• Up to one binary search and insert (O(logS + S)).
• I/O: 1 read O(S), up to 1 mutate O(S). Up to one remove.
• One event.
• Storage: inserts one item, value size bounded by MaxSignatories, with a deposit taken for its lifetime of DepositBase + threshold * DepositFactor.

---

• DB Weight:
  • Read: Multisig Storage, [Caller Account]
  • Write: Multisig Storage, [Caller Account]

pub fn cancel_as_multi( origin: OriginFor<T>, threshold: u16, other_signatories: Vec<T::AccountId>, timepoint: Timepoint<T::BlockNumber>, call_hash: [u8; 32] ) -> DispatchResult

Cancel a pre-existing, on-going multisig transaction. Any deposit reserved previously for this operation will be unreserved on success.

The dispatch origin for this call must be Signed.

• threshold: The total number of approvals for this dispatch before it is executed.
• other_signatories: The accounts (other than the sender) who can approve this dispatch. May not be empty.
• timepoint: The timepoint (block number and transaction index) of the first approval transaction for this dispatch.
• call_hash: The hash of the call to be executed.

• O(S).
• Up to one balance-reserve or unreserve operation.
• One passthrough operation, one insert, both O(S) where S is the number of signatories. S is capped by MaxSignatories, with weight being proportional.
• One encode & hash, both of complexity O(S).
• One event.
• I/O: 1 read O(S), one remove.
• Storage: removes one item.

---

• DB Weight:
  • Read: Multisig Storage, [Caller Account], Refund Account
  • Write: Multisig Storage, [Caller Account], Refund Account

impl<T: Config> Pallet<T>

pub fn multi_account_id(who: &[T::AccountId], threshold: u16) -> T::AccountId

Derive a multi-account ID from the sorted list of accounts and the threshold that are required.

NOTE: who must be sorted. If it is not, then you’ll get the wrong answer.

pub fn timepoint() -> Timepoint<T::BlockNumber>

The current Timepoint.

Trait Implementations

impl<T: Config> Callable<T> for Pallet<T>

type RuntimeCall = Call<T>

impl<T> Clone for Pallet<T>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> Debug for Pallet<T>

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<T: Config> GetStorageVersion for Pallet<T>

fn current_storage_version() -> StorageVersion

Returns the current storage version as supported by the pallet.

fn on_chain_storage_version() -> StorageVersion

Returns the on-chain storage version of the pallet as stored in the storage.

impl<T: Config> Hooks<<T as Config>::BlockNumber> for Pallet<T>

fn on_finalize(_n: BlockNumber)

The block is being finalized. Implement to have something happen.

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

This will be run when the block is being finalized (before on_finalize). Implement to have something happen using the remaining weight. Will not fire if the remaining weight is 0. Return the weight used, the hook will subtract it from current weight used and pass the result to the next on_idle hook if it exists.

fn on_initialize(_n: BlockNumber) -> Weight

The block is being initialized. Implement to have something happen.

fn on_runtime_upgrade() -> Weight

Perform a module upgrade.

fn offchain_worker(_n: BlockNumber)

Implementing this function on a module allows you to perform long-running tasks that make (by default) validators generate transactions that feed results of those long-running computations back on chain.

fn integrity_test()

Run integrity test.

impl<T: Config> IntegrityTest for Pallet<T>

fn integrity_test()

Run integrity test.

impl<T: Config> OffchainWorker<<T as Config>::BlockNumber> for Pallet<T>

fn offchain_worker(n: <T as Config>::BlockNumber)

This function is being called after every block import (when fully synced).

impl<T: Config> OnFinalize<<T as Config>::BlockNumber> for Pallet<T>

fn on_finalize(n: <T as Config>::BlockNumber)

The block is being finalized. Implement to have something happen.

impl<T: Config> OnGenesis for Pallet<T>

fn on_genesis()

Something that should happen at genesis.

impl<T: Config> OnIdle<<T as Config>::BlockNumber> for Pallet<T>

fn on_idle(n: <T as Config>::BlockNumber, remaining_weight: Weight) -> Weight

The block is being finalized. Implement to have something happen in case there is leftover weight. Check the passed remaining_weight to make sure it is high enough to allow for your pallet’s extra computation.

impl<T: Config> OnInitialize<<T as Config>::BlockNumber> for Pallet<T>

fn on_initialize(n: <T as Config>::BlockNumber) -> Weight

The block is being initialized. Implement to have something happen.

impl<T: Config> OnRuntimeUpgrade for Pallet<T>

fn on_runtime_upgrade() -> Weight

Perform a module upgrade.

impl<T: Config> PalletInfoAccess for Pallet<T>

fn index() -> usize

Index of the pallet as configured in the runtime.

fn name() -> &'static str

Name of the pallet as configured in the runtime.

fn module_name() -> &'static str

Name of the Rust module containing the pallet.

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.

impl<T: Config> PalletsInfoAccess for Pallet<T>

fn count() -> usize

The number of pallets’ information that this type represents.

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.

impl<T> PartialEq<Pallet<T>> for Pallet<T>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T: Config> StorageInfoTrait for Pallet<T>

fn storage_info() -> Vec<StorageInfo>

impl<T: Config> WhitelistedStorageKeys for Pallet<T>

fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>

Returns a Vec<TrackedStorageKey> indicating the storage keys that should be whitelisted during benchmarking. This means that those keys will be excluded from the benchmarking performance calculation.

impl<T> Eq for Pallet<T>