pub struct Pallet<T>(_);
Expand description

The pallet implementing the on-chain logic.

Implementations§

source§

impl<T: Config> Pallet<T>

Methods for the ValidateUnsigned implementation: It restricts calls to report_equivocation_unsigned to local calls (i.e. extrinsics generated on this node) or that already in a block. This guarantees that only block authors can include unsigned equivocation reports.

source§

impl<T: Config> Pallet<T>

source

pub fn report_equivocation( origin: OriginFor<T>, equivocation_proof: Box<EquivocationProof<T::Hash, T::BlockNumber>>, key_owner_proof: T::KeyOwnerProof ) -> DispatchResultWithPostInfo

Report voter equivocation/misbehavior. This method will verify the equivocation proof and validate the given key ownership proof against the extracted offender. If both are valid, the offence will be reported.

source

pub fn report_equivocation_unsigned( origin: OriginFor<T>, equivocation_proof: Box<EquivocationProof<T::Hash, T::BlockNumber>>, key_owner_proof: T::KeyOwnerProof ) -> DispatchResultWithPostInfo

Report voter equivocation/misbehavior. This method will verify the equivocation proof and validate the given key ownership proof against the extracted offender. If both are valid, the offence will be reported.

This extrinsic must be called unsigned and it is expected that only block authors will call it (validated in ValidateUnsigned), as such if the block author is defined it will be defined as the equivocation reporter.

source

pub fn note_stalled( origin: OriginFor<T>, delay: T::BlockNumber, best_finalized_block_number: T::BlockNumber ) -> DispatchResult

Note that the current authority set of the GRANDPA finality gadget has stalled.

This will trigger a forced authority set change at the beginning of the next session, to be enacted delay blocks after that. The delay should be high enough to safely assume that the block signalling the forced change will not be re-orged e.g. 1000 blocks. The block production rate (which may be slowed down because of finality lagging) should be taken into account when choosing the delay. The GRANDPA voters based on the new authority will start voting on top of best_finalized_block_number for new finalized blocks. best_finalized_block_number should be the highest of the latest finalized block of all validators of the new authority set.

Only callable by root.

source§

impl<T: Config> Pallet<T>

source

pub fn state() -> StoredState<T::BlockNumber>

State of the current authority set.

source§

impl<T: Config> Pallet<T>

source

pub fn pending_change( ) -> Option<StoredPendingChange<T::BlockNumber, T::MaxAuthorities>>

Pending change: (signaled at, scheduled change).

source§

impl<T: Config> Pallet<T>

source

pub fn next_forced() -> Option<T::BlockNumber>

next block number where we can force a change.

source§

impl<T: Config> Pallet<T>

source

pub fn stalled() -> Option<(T::BlockNumber, T::BlockNumber)>

true if we are currently stalled.

source§

impl<T: Config> Pallet<T>

source

pub fn current_set_id() -> SetId

The number of changes (both in terms of keys and underlying economic responsibilities) in the “set” of Grandpa validators from genesis.

source§

impl<T: Config> Pallet<T>

source

pub fn session_for_set<KArg>(k: KArg) -> Option<SessionIndex>where KArg: EncodeLike<SetId>,

A mapping from grandpa set ID to the index of the most recent session for which its members were responsible.

TWOX-NOTE: SetId is not under user control.

source§

impl<T: Config> Pallet<T>

source

pub fn grandpa_authorities() -> AuthorityList

Get the current set of authorities, along with their respective weights.

source

pub fn schedule_pause(in_blocks: T::BlockNumber) -> DispatchResult

Schedule GRANDPA to pause starting in the given number of blocks. Cannot be done when already paused.

source

pub fn schedule_resume(in_blocks: T::BlockNumber) -> DispatchResult

Schedule a resume of GRANDPA after pausing.

source

pub fn schedule_change( next_authorities: AuthorityList, in_blocks: T::BlockNumber, forced: Option<T::BlockNumber> ) -> DispatchResult

Schedule a change in the authorities.

The change will be applied at the end of execution of the block in_blocks after the current block. This value may be 0, in which case the change is applied at the end of the current block.

If the forced parameter is defined, this indicates that the current set has been synchronously determined to be offline and that after in_blocks the given change should be applied. The given block number indicates the median last finalized block number and it should be used as the canon block when starting the new grandpa voter.

No change should be signaled while any change is pending. Returns an error if a change is already pending.

source

pub fn submit_unsigned_equivocation_report( equivocation_proof: EquivocationProof<T::Hash, T::BlockNumber>, key_owner_proof: T::KeyOwnerProof ) -> Option<()>

Submits an extrinsic to report an equivocation. This method will create an unsigned extrinsic with a call to report_equivocation_unsigned and will push the transaction to the pool. Only useful in an offchain context.

Trait Implementations§

source§

impl<T: Config> BoundToRuntimeAppPublic for Pallet<T>

§

type Public = Public

The RuntimeAppPublic this type is bound to.
source§

impl<T: Config> Callable<T> for Pallet<T>

source§

impl<T> Clone for Pallet<T>

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl<T> Debug for Pallet<T>

source§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl<T: Config> GetStorageVersion for Pallet<T>

source§

fn current_storage_version() -> StorageVersion

Returns the current storage version as supported by the pallet.
source§

fn on_chain_storage_version() -> StorageVersion

Returns the on-chain storage version of the pallet as stored in the storage.
source§

impl<T: Config> Hooks<<T as Config>::BlockNumber> for Pallet<T>

source§

fn on_finalize(block_number: T::BlockNumber)

The block is being finalized. Implement to have something happen.
source§

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

This will be run when the block is being finalized (before on_finalize). Implement to have something happen using the remaining weight. Will not fire if the remaining weight is 0. Return the weight used, the hook will subtract it from current weight used and pass the result to the next on_idle hook if it exists.
source§

fn on_initialize(_n: BlockNumber) -> Weight

The block is being initialized. Implement to have something happen. Read more
source§

fn on_runtime_upgrade() -> Weight

Perform a module upgrade. Read more
source§

fn offchain_worker(_n: BlockNumber)

Implementing this function on a module allows you to perform long-running tasks that make (by default) validators generate transactions that feed results of those long-running computations back on chain. Read more
source§

fn integrity_test()

Run integrity test. Read more
source§

impl<T: Config> IntegrityTest for Pallet<T>

source§

fn integrity_test()

Run integrity test. Read more
source§

impl<T: Config> OffchainWorker<<T as Config>::BlockNumber> for Pallet<T>

source§

fn offchain_worker(n: <T as Config>::BlockNumber)

This function is being called after every block import (when fully synced). Read more
source§

impl<T: Config> OnFinalize<<T as Config>::BlockNumber> for Pallet<T>

source§

fn on_finalize(n: <T as Config>::BlockNumber)

The block is being finalized. Implement to have something happen. Read more
source§

impl<T: Config> OnGenesis for Pallet<T>

source§

fn on_genesis()

Something that should happen at genesis.
source§

impl<T: Config> OnIdle<<T as Config>::BlockNumber> for Pallet<T>

source§

fn on_idle(n: <T as Config>::BlockNumber, remaining_weight: Weight) -> Weight

The block is being finalized. Implement to have something happen in case there is leftover weight. Check the passed remaining_weight to make sure it is high enough to allow for your pallet’s extra computation. Read more
source§

impl<T: Config> OnInitialize<<T as Config>::BlockNumber> for Pallet<T>

source§

fn on_initialize(n: <T as Config>::BlockNumber) -> Weight

The block is being initialized. Implement to have something happen. Read more
source§

impl<T: Config> OnRuntimeUpgrade for Pallet<T>

source§

fn on_runtime_upgrade() -> Weight

Perform a module upgrade. Read more
source§

impl<T> OneSessionHandler<<T as Config>::AccountId> for Pallet<T>where T: Config + Config,

§

type Key = Public

The key type expected.
source§

fn on_genesis_session<'a, I>(validators: I)where I: Iterator<Item = (&'a T::AccountId, AuthorityId)> + 'a,

The given validator set will be used for the genesis session. It is guaranteed that the given validator set will also be used for the second session, therefore the first call to on_new_session should provide the same validator set.
source§

fn on_new_session<'a, I>(changed: bool, validators: I, _queued_validators: I)where I: Iterator<Item = (&'a T::AccountId, AuthorityId)> + 'a,

Session set has changed; act appropriately. Note that this can be called before initialization of your module. Read more
source§

fn on_disabled(i: u32)

A validator got disabled. Act accordingly until a new session begins.
source§

fn on_before_session_ending()

A notification for end of the session. Read more
source§

impl<T: Config> PalletInfoAccess for Pallet<T>

source§

fn index() -> usize

Index of the pallet as configured in the runtime.
source§

fn name() -> &'static str

Name of the pallet as configured in the runtime.
source§

fn module_name() -> &'static str

Name of the Rust module containing the pallet.
source§

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.
source§

impl<T: Config> PalletsInfoAccess for Pallet<T>

source§

fn count() -> usize

The number of pallets’ information that this type represents. Read more
source§

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.
source§

impl<T> PartialEq<Pallet<T>> for Pallet<T>

source§

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<T: Config> StorageInfoTrait for Pallet<T>

source§

impl<T: Config> ValidateUnsigned for Pallet<T>

§

type Call = Call<T>

The call to validate
source§

fn validate_unsigned( source: TransactionSource, call: &Self::Call ) -> TransactionValidity

Return the validity of the call Read more
source§

fn pre_dispatch(call: &Self::Call) -> Result<(), TransactionValidityError>

Validate the call right before dispatch. Read more
source§

impl<T: Config> WhitelistedStorageKeys for Pallet<T>

source§

fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>

Returns a Vec<TrackedStorageKey> indicating the storage keys that should be whitelisted during benchmarking. This means that those keys will be excluded from the benchmarking performance calculation.
source§

impl<T> Eq for Pallet<T>

Auto Trait Implementations§

§

impl<T> RefUnwindSafe for Pallet<T>where T: RefUnwindSafe,

§

impl<T> Send for Pallet<T>where T: Send,

§

impl<T> Sync for Pallet<T>where T: Sync,

§

impl<T> Unpin for Pallet<T>where T: Unpin,

§

impl<T> UnwindSafe for Pallet<T>where T: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CheckedConversion for T

source§

fn checked_from<T>(t: T) -> Option<Self>where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more
source§

fn checked_into<T>(self) -> Option<T>where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more
source§

impl<T> Conv for T

source§

fn conv<T>(self) -> Twhere Self: Into<T>,

Converts self into T using Into<T>. Read more
source§

impl<T> Downcast for Twhere T: Any,

source§

fn into_any(self: Box<T, Global>) -> Box<dyn Any, Global>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
source§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
source§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
source§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
source§

impl<T> DowncastSync for Twhere T: Any + Send + Sync,

source§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> DynClone for Twhere T: Clone,

source§

fn __clone_box(&self, _: Private) -> *mut ()

source§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
source§

impl<T> FmtForward for T

source§

fn fmt_binary(self) -> FmtBinary<Self>where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
source§

fn fmt_display(self) -> FmtDisplay<Self>where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
source§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
source§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
source§

fn fmt_octal(self) -> FmtOctal<Self>where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
source§

fn fmt_pointer(self) -> FmtPointer<Self>where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
source§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
source§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
source§

fn fmt_list(self) -> FmtList<Self>where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IsType<T> for T

source§

fn from_ref(t: &T) -> &T

Cast reference.
source§

fn into_ref(&self) -> &T

Cast reference.
source§

fn from_mut(t: &mut T) -> &mut T

Cast mutable reference.
source§

fn into_mut(&mut self) -> &mut T

Cast mutable reference.
source§

impl<T, Outer> IsWrappedBy<Outer> for Twhere Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

source§

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

source§

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

source§

impl<T> PalletVersionToStorageVersionHelper for Twhere T: GetStorageVersion + PalletInfoAccess,

source§

impl<T> Pipe for Twhere T: ?Sized,

source§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
source§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
source§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
source§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
source§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> Rwhere Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
source§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
source§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
source§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> Rwhere Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
source§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> Rwhere Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
source§

impl<T> Pointable for T

source§

const ALIGN: usize = mem::align_of::<T>()

The alignment of pointer.
§

type Init = T

The type for initializers.
source§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
source§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
source§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
source§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
source§

impl<T> SaturatedConversion for T

source§

fn saturated_from<T>(t: T) -> Selfwhere Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more
source§

fn saturated_into<T>(self) -> Twhere Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more
source§

impl<T> Tap for T

source§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
source§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
source§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
source§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
source§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
source§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
source§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
source§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
source§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
source§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
source§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
source§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
source§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
source§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
source§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
source§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> TryConv for T

source§

fn try_conv<T>(self) -> Result<T, Self::Error>where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<S, T> UncheckedInto<T> for Swhere T: UncheckedFrom<S>,

source§

fn unchecked_into(self) -> T

The counterpart to unchecked_from.
source§

impl<T, S> UniqueSaturatedInto<T> for Swhere T: Bounded, S: TryInto<T>,

source§

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.
source§

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

source§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

impl<T> MaybeDebug for Twhere T: Debug,

source§

impl<T> MaybeDebug for Twhere T: Debug,

source§

impl<T> MaybeRefUnwindSafe for Twhere T: RefUnwindSafe,

source§

impl<T> Member for Twhere T: Send + Sync + Debug + Eq + PartialEq<T> + Clone + 'static,