Trait byteorder::ReadBytesExt

source · 
pub trait ReadBytesExt: Read {

Show 33 methods    // Provided methods
    fn read_u8(&mut self) -> Result<u8> { ... }
    fn read_i8(&mut self) -> Result<i8> { ... }
    fn read_u16<T: ByteOrder>(&mut self) -> Result<u16> { ... }
    fn read_i16<T: ByteOrder>(&mut self) -> Result<i16> { ... }
    fn read_u24<T: ByteOrder>(&mut self) -> Result<u32> { ... }
    fn read_i24<T: ByteOrder>(&mut self) -> Result<i32> { ... }
    fn read_u32<T: ByteOrder>(&mut self) -> Result<u32> { ... }
    fn read_i32<T: ByteOrder>(&mut self) -> Result<i32> { ... }
    fn read_u48<T: ByteOrder>(&mut self) -> Result<u64> { ... }
    fn read_i48<T: ByteOrder>(&mut self) -> Result<i64> { ... }
    fn read_u64<T: ByteOrder>(&mut self) -> Result<u64> { ... }
    fn read_i64<T: ByteOrder>(&mut self) -> Result<i64> { ... }
    fn read_u128<T: ByteOrder>(&mut self) -> Result<u128> { ... }
    fn read_i128<T: ByteOrder>(&mut self) -> Result<i128> { ... }
    fn read_uint<T: ByteOrder>(&mut self, nbytes: usize) -> Result<u64> { ... }
    fn read_int<T: ByteOrder>(&mut self, nbytes: usize) -> Result<i64> { ... }
    fn read_uint128<T: ByteOrder>(&mut self, nbytes: usize) -> Result<u128> { ... }
    fn read_int128<T: ByteOrder>(&mut self, nbytes: usize) -> Result<i128> { ... }
    fn read_f32<T: ByteOrder>(&mut self) -> Result<f32> { ... }
    fn read_f64<T: ByteOrder>(&mut self) -> Result<f64> { ... }
    fn read_u16_into<T: ByteOrder>(&mut self, dst: &mut [u16]) -> Result<()> { ... }
    fn read_u32_into<T: ByteOrder>(&mut self, dst: &mut [u32]) -> Result<()> { ... }
    fn read_u64_into<T: ByteOrder>(&mut self, dst: &mut [u64]) -> Result<()> { ... }
    fn read_u128_into<T: ByteOrder>(&mut self, dst: &mut [u128]) -> Result<()> { ... }
    fn read_i8_into(&mut self, dst: &mut [i8]) -> Result<()> { ... }
    fn read_i16_into<T: ByteOrder>(&mut self, dst: &mut [i16]) -> Result<()> { ... }
    fn read_i32_into<T: ByteOrder>(&mut self, dst: &mut [i32]) -> Result<()> { ... }
    fn read_i64_into<T: ByteOrder>(&mut self, dst: &mut [i64]) -> Result<()> { ... }
    fn read_i128_into<T: ByteOrder>(&mut self, dst: &mut [i128]) -> Result<()> { ... }
    fn read_f32_into<T: ByteOrder>(&mut self, dst: &mut [f32]) -> Result<()> { ... }
    fn read_f32_into_unchecked<T: ByteOrder>(
        &mut self,
        dst: &mut [f32]
    ) -> Result<()> { ... }
    fn read_f64_into<T: ByteOrder>(&mut self, dst: &mut [f64]) -> Result<()> { ... }
    fn read_f64_into_unchecked<T: ByteOrder>(
        &mut self,
        dst: &mut [f64]
    ) -> Result<()> { ... }

}
Expand description

Extends Read with methods for reading numbers. (For std::io.)

Most of the methods defined here have an unconstrained type parameter that must be explicitly instantiated. Typically, it is instantiated with either the BigEndian or LittleEndian types defined in this crate.

Examples

Read unsigned 16 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![2, 5, 3, 0]);
assert_eq!(517, rdr.read_u16::<BigEndian>().unwrap());
assert_eq!(768, rdr.read_u16::<BigEndian>().unwrap());

Provided Methods§

source

fn read_u8(&mut self) -> Result<u8>

Reads an unsigned 8 bit integer from the underlying reader.

Note that since this reads a single byte, no byte order conversions are used. It is included for completeness.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read unsigned 8 bit integers from a Read:

use std::io::Cursor;
use byteorder::ReadBytesExt;

let mut rdr = Cursor::new(vec![2, 5]);
assert_eq!(2, rdr.read_u8().unwrap());
assert_eq!(5, rdr.read_u8().unwrap());
source

fn read_i8(&mut self) -> Result<i8>

Reads a signed 8 bit integer from the underlying reader.

Note that since this reads a single byte, no byte order conversions are used. It is included for completeness.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read signed 8 bit integers from a Read:

use std::io::Cursor;
use byteorder::ReadBytesExt;

let mut rdr = Cursor::new(vec![0x02, 0xfb]);
assert_eq!(2, rdr.read_i8().unwrap());
assert_eq!(-5, rdr.read_i8().unwrap());
source

fn read_u16<T: ByteOrder>(&mut self) -> Result<u16>

Reads an unsigned 16 bit integer from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read unsigned 16 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![2, 5, 3, 0]);
assert_eq!(517, rdr.read_u16::<BigEndian>().unwrap());
assert_eq!(768, rdr.read_u16::<BigEndian>().unwrap());
source

fn read_i16<T: ByteOrder>(&mut self) -> Result<i16>

Reads a signed 16 bit integer from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read signed 16 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![0x00, 0xc1, 0xff, 0x7c]);
assert_eq!(193, rdr.read_i16::<BigEndian>().unwrap());
assert_eq!(-132, rdr.read_i16::<BigEndian>().unwrap());
source

fn read_u24<T: ByteOrder>(&mut self) -> Result<u32>

Reads an unsigned 24 bit integer from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read unsigned 24 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![0x00, 0x01, 0x0b]);
assert_eq!(267, rdr.read_u24::<BigEndian>().unwrap());
source

fn read_i24<T: ByteOrder>(&mut self) -> Result<i32>

Reads a signed 24 bit integer from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read signed 24 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![0xff, 0x7a, 0x33]);
assert_eq!(-34253, rdr.read_i24::<BigEndian>().unwrap());
source

fn read_u32<T: ByteOrder>(&mut self) -> Result<u32>

Reads an unsigned 32 bit integer from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read unsigned 32 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![0x00, 0x00, 0x01, 0x0b]);
assert_eq!(267, rdr.read_u32::<BigEndian>().unwrap());
source

fn read_i32<T: ByteOrder>(&mut self) -> Result<i32>

Reads a signed 32 bit integer from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read signed 32 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![0xff, 0xff, 0x7a, 0x33]);
assert_eq!(-34253, rdr.read_i32::<BigEndian>().unwrap());
source

fn read_u48<T: ByteOrder>(&mut self) -> Result<u64>

Reads an unsigned 48 bit integer from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read unsigned 48 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![0xb6, 0x71, 0x6b, 0xdc, 0x2b, 0x31]);
assert_eq!(200598257150769, rdr.read_u48::<BigEndian>().unwrap());
source

fn read_i48<T: ByteOrder>(&mut self) -> Result<i64>

Reads a signed 48 bit integer from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read signed 48 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![0x9d, 0x71, 0xab, 0xe7, 0x97, 0x8f]);
assert_eq!(-108363435763825, rdr.read_i48::<BigEndian>().unwrap());
source

fn read_u64<T: ByteOrder>(&mut self) -> Result<u64>

Reads an unsigned 64 bit integer from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read an unsigned 64 bit big-endian integer from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![0x00, 0x03, 0x43, 0x95, 0x4d, 0x60, 0x86, 0x83]);
assert_eq!(918733457491587, rdr.read_u64::<BigEndian>().unwrap());
source

fn read_i64<T: ByteOrder>(&mut self) -> Result<i64>

Reads a signed 64 bit integer from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a signed 64 bit big-endian integer from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![0x80, 0, 0, 0, 0, 0, 0, 0]);
assert_eq!(i64::min_value(), rdr.read_i64::<BigEndian>().unwrap());
source

fn read_u128<T: ByteOrder>(&mut self) -> Result<u128>

Reads an unsigned 128 bit integer from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read an unsigned 128 bit big-endian integer from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![
    0x00, 0x03, 0x43, 0x95, 0x4d, 0x60, 0x86, 0x83,
    0x00, 0x03, 0x43, 0x95, 0x4d, 0x60, 0x86, 0x83
]);
assert_eq!(16947640962301618749969007319746179, rdr.read_u128::<BigEndian>().unwrap());
source

fn read_i128<T: ByteOrder>(&mut self) -> Result<i128>

Reads a signed 128 bit integer from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a signed 128 bit big-endian integer from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]);
assert_eq!(i128::min_value(), rdr.read_i128::<BigEndian>().unwrap());
source

fn read_uint<T: ByteOrder>(&mut self, nbytes: usize) -> Result<u64>

Reads an unsigned n-bytes integer from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read an unsigned n-byte big-endian integer from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![0x80, 0x74, 0xfa]);
assert_eq!(8418554, rdr.read_uint::<BigEndian>(3).unwrap());
source

fn read_int<T: ByteOrder>(&mut self, nbytes: usize) -> Result<i64>

Reads a signed n-bytes integer from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read an unsigned n-byte big-endian integer from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![0xc1, 0xff, 0x7c]);
assert_eq!(-4063364, rdr.read_int::<BigEndian>(3).unwrap());
source

fn read_uint128<T: ByteOrder>(&mut self, nbytes: usize) -> Result<u128>

Reads an unsigned n-bytes integer from the underlying reader.

source

fn read_int128<T: ByteOrder>(&mut self, nbytes: usize) -> Result<i128>

Reads a signed n-bytes integer from the underlying reader.

source

fn read_f32<T: ByteOrder>(&mut self) -> Result<f32>

Reads a IEEE754 single-precision (4 bytes) floating point number from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a big-endian single-precision floating point number from a Read:

use std::f32;
use std::io::Cursor;

use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![
    0x40, 0x49, 0x0f, 0xdb,
]);
assert_eq!(f32::consts::PI, rdr.read_f32::<BigEndian>().unwrap());
source

fn read_f64<T: ByteOrder>(&mut self) -> Result<f64>

Reads a IEEE754 double-precision (8 bytes) floating point number from the underlying reader.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a big-endian double-precision floating point number from a Read:

use std::f64;
use std::io::Cursor;

use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![
    0x40, 0x09, 0x21, 0xfb, 0x54, 0x44, 0x2d, 0x18,
]);
assert_eq!(f64::consts::PI, rdr.read_f64::<BigEndian>().unwrap());
source

fn read_u16_into<T: ByteOrder>(&mut self, dst: &mut [u16]) -> Result<()>

Reads a sequence of unsigned 16 bit integers from the underlying reader.

The given buffer is either filled completely or an error is returned. If an error is returned, the contents of dst are unspecified.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a sequence of unsigned 16 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![2, 5, 3, 0]);
let mut dst = [0; 2];
rdr.read_u16_into::<BigEndian>(&mut dst).unwrap();
assert_eq!([517, 768], dst);
source

fn read_u32_into<T: ByteOrder>(&mut self, dst: &mut [u32]) -> Result<()>

Reads a sequence of unsigned 32 bit integers from the underlying reader.

The given buffer is either filled completely or an error is returned. If an error is returned, the contents of dst are unspecified.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a sequence of unsigned 32 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![0, 0, 2, 5, 0, 0, 3, 0]);
let mut dst = [0; 2];
rdr.read_u32_into::<BigEndian>(&mut dst).unwrap();
assert_eq!([517, 768], dst);
source

fn read_u64_into<T: ByteOrder>(&mut self, dst: &mut [u64]) -> Result<()>

Reads a sequence of unsigned 64 bit integers from the underlying reader.

The given buffer is either filled completely or an error is returned. If an error is returned, the contents of dst are unspecified.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a sequence of unsigned 64 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![
    0, 0, 0, 0, 0, 0, 2, 5,
    0, 0, 0, 0, 0, 0, 3, 0,
]);
let mut dst = [0; 2];
rdr.read_u64_into::<BigEndian>(&mut dst).unwrap();
assert_eq!([517, 768], dst);
source

fn read_u128_into<T: ByteOrder>(&mut self, dst: &mut [u128]) -> Result<()>

Reads a sequence of unsigned 128 bit integers from the underlying reader.

The given buffer is either filled completely or an error is returned. If an error is returned, the contents of dst are unspecified.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a sequence of unsigned 128 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![
    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 5,
    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 0,
]);
let mut dst = [0; 2];
rdr.read_u128_into::<BigEndian>(&mut dst).unwrap();
assert_eq!([517, 768], dst);
source

fn read_i8_into(&mut self, dst: &mut [i8]) -> Result<()>

Reads a sequence of signed 8 bit integers from the underlying reader.

The given buffer is either filled completely or an error is returned. If an error is returned, the contents of dst are unspecified.

Note that since each i8 is a single byte, no byte order conversions are used. This method is included because it provides a safe, simple way for the caller to read into a &mut [i8] buffer. (Without this method, the caller would have to either use unsafe code or convert each byte to i8 individually.)

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a sequence of signed 8 bit integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![2, 251, 3]);
let mut dst = [0; 3];
rdr.read_i8_into(&mut dst).unwrap();
assert_eq!([2, -5, 3], dst);
source

fn read_i16_into<T: ByteOrder>(&mut self, dst: &mut [i16]) -> Result<()>

Reads a sequence of signed 16 bit integers from the underlying reader.

The given buffer is either filled completely or an error is returned. If an error is returned, the contents of dst are unspecified.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a sequence of signed 16 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![2, 5, 3, 0]);
let mut dst = [0; 2];
rdr.read_i16_into::<BigEndian>(&mut dst).unwrap();
assert_eq!([517, 768], dst);
source

fn read_i32_into<T: ByteOrder>(&mut self, dst: &mut [i32]) -> Result<()>

Reads a sequence of signed 32 bit integers from the underlying reader.

The given buffer is either filled completely or an error is returned. If an error is returned, the contents of dst are unspecified.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a sequence of signed 32 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![0, 0, 2, 5, 0, 0, 3, 0]);
let mut dst = [0; 2];
rdr.read_i32_into::<BigEndian>(&mut dst).unwrap();
assert_eq!([517, 768], dst);
source

fn read_i64_into<T: ByteOrder>(&mut self, dst: &mut [i64]) -> Result<()>

Reads a sequence of signed 64 bit integers from the underlying reader.

The given buffer is either filled completely or an error is returned. If an error is returned, the contents of dst are unspecified.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a sequence of signed 64 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![
    0, 0, 0, 0, 0, 0, 2, 5,
    0, 0, 0, 0, 0, 0, 3, 0,
]);
let mut dst = [0; 2];
rdr.read_i64_into::<BigEndian>(&mut dst).unwrap();
assert_eq!([517, 768], dst);
source

fn read_i128_into<T: ByteOrder>(&mut self, dst: &mut [i128]) -> Result<()>

Reads a sequence of signed 128 bit integers from the underlying reader.

The given buffer is either filled completely or an error is returned. If an error is returned, the contents of dst are unspecified.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a sequence of signed 128 bit big-endian integers from a Read:

use std::io::Cursor;
use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![
    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 5,
    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 0,
]);
let mut dst = [0; 2];
rdr.read_i128_into::<BigEndian>(&mut dst).unwrap();
assert_eq!([517, 768], dst);
source

fn read_f32_into<T: ByteOrder>(&mut self, dst: &mut [f32]) -> Result<()>

Reads a sequence of IEEE754 single-precision (4 bytes) floating point numbers from the underlying reader.

The given buffer is either filled completely or an error is returned. If an error is returned, the contents of dst are unspecified.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a sequence of big-endian single-precision floating point number from a Read:

use std::f32;
use std::io::Cursor;

use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![
    0x40, 0x49, 0x0f, 0xdb,
    0x3f, 0x80, 0x00, 0x00,
]);
let mut dst = [0.0; 2];
rdr.read_f32_into::<BigEndian>(&mut dst).unwrap();
assert_eq!([f32::consts::PI, 1.0], dst);
source

fn read_f32_into_unchecked<T: ByteOrder>( &mut self, dst: &mut [f32] ) -> Result<()>

👎Deprecated since 1.2.0: please use read_f32_into instead

DEPRECATED.

This method is deprecated. Use read_f32_into instead.

Reads a sequence of IEEE754 single-precision (4 bytes) floating point numbers from the underlying reader.

The given buffer is either filled completely or an error is returned. If an error is returned, the contents of dst are unspecified.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a sequence of big-endian single-precision floating point number from a Read:

use std::f32;
use std::io::Cursor;

use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![
    0x40, 0x49, 0x0f, 0xdb,
    0x3f, 0x80, 0x00, 0x00,
]);
let mut dst = [0.0; 2];
rdr.read_f32_into_unchecked::<BigEndian>(&mut dst).unwrap();
assert_eq!([f32::consts::PI, 1.0], dst);
source

fn read_f64_into<T: ByteOrder>(&mut self, dst: &mut [f64]) -> Result<()>

Reads a sequence of IEEE754 double-precision (8 bytes) floating point numbers from the underlying reader.

The given buffer is either filled completely or an error is returned. If an error is returned, the contents of dst are unspecified.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a sequence of big-endian single-precision floating point number from a Read:

use std::f64;
use std::io::Cursor;

use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![
    0x40, 0x09, 0x21, 0xfb, 0x54, 0x44, 0x2d, 0x18,
    0x3f, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
]);
let mut dst = [0.0; 2];
rdr.read_f64_into::<BigEndian>(&mut dst).unwrap();
assert_eq!([f64::consts::PI, 1.0], dst);
source

fn read_f64_into_unchecked<T: ByteOrder>( &mut self, dst: &mut [f64] ) -> Result<()>

👎Deprecated since 1.2.0: please use read_f64_into instead

DEPRECATED.

This method is deprecated. Use read_f64_into instead.

Reads a sequence of IEEE754 double-precision (8 bytes) floating point numbers from the underlying reader.

The given buffer is either filled completely or an error is returned. If an error is returned, the contents of dst are unspecified.

Safety

This method is unsafe because there are no guarantees made about the floating point values. In particular, this method does not check for signaling NaNs, which may result in undefined behavior.

Errors

This method returns the same errors as Read::read_exact.

Examples

Read a sequence of big-endian single-precision floating point number from a Read:

use std::f64;
use std::io::Cursor;

use byteorder::{BigEndian, ReadBytesExt};

let mut rdr = Cursor::new(vec![
    0x40, 0x09, 0x21, 0xfb, 0x54, 0x44, 0x2d, 0x18,
    0x3f, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
]);
let mut dst = [0.0; 2];
rdr.read_f64_into_unchecked::<BigEndian>(&mut dst).unwrap();
assert_eq!([f64::consts::PI, 1.0], dst);

Implementors§

source§

impl<R: Read + ?Sized> ReadBytesExt for R

All types that implement Read get methods defined in ReadBytesExt for free.