Struct bitvec::slice::RSplitNMutNoAlias

#[repr(transparent)]
pub struct RSplitNMutNoAlias<'a, T, O, P>where
    T: 'a + BitStore,
    O: BitOrder,
    P: FnMut(usize, &bool) -> bool,{ /* private fields */ }

Anti-Aliasing Iterator Adapter

This structure is an adapter over a corresponding &mut BitSlice iterator. It removes the ::Alias taint marker, allowing mutations through each yielded bit reference to skip any costs associated with aliasing.

Safety

The default &mut BitSlice iterators attach an ::Alias taint for a reason: the iterator protocol does not mandate that yielded items have a narrower lifespan than the iterator that produced them! As such, it is completely possible to pull multiple yielded items out into the same scope, where they have overlapping lifetimes.

The BitStore principles require that whenever two write-capable handles to the same memory region have overlapping lifetimes, they must be ::Alias tainted. This adapter removes the ::Alias taint, but is not able to enforce strictly non-overlapping lifetimes of yielded items.

As such, this adapter is unsafe to construct, and you must only use it in a for-loop where each yielded item does not escape the loop body.

In order to help enforce this limitation, this adapter structure is not Send or Sync. It must be consumed in the scope where it was created.

Usage

If you are using a loop that satisfies the safety requirement, you can use the .remove_alias() method on your mutable iterator and configure it to yield handles that do not impose additional alias-protection costs when accessing the underlying memory.

Note that this adapter does not go to T::Unalias: it only takes an iterator that yields T::Alias and unwinds it to T. If the source bit-slice was already alias-tainted, the original protection is not removed. You are responsible for doing so by using .bit_domain_mut().

Examples

This example shows using .chunks_mut() without incurring alias protection.

This documentation is replicated on all NoAlias types; the examples will work for all of them, but are not specialized in the text.

use bitvec::prelude::*;
use bitvec::slice::{ChunksMut, ChunksMutNoAlias};
type Alias8 = <u8 as BitStore>::Alias;

let mut data: BitArr!(for 40, in u8, Msb0) = bitarr![u8, Msb0; 0; 40];

let mut chunks: ChunksMut<u8, Msb0> = data.chunks_mut(5);
let _chunk: &mut BitSlice<Alias8, Msb0> = chunks.next().unwrap();

let mut chunks: ChunksMutNoAlias<u8, Msb0> = unsafe { chunks.remove_alias() };
let _chunk: &mut BitSlice<u8, Msb0> = chunks.next().unwrap();

This example shows how use of .split_at_mut() forces the .remove_alias() to still retain a layer of alias protection.

use bitvec::prelude::*;
use bitvec::slice::{ChunksMut, ChunksMutNoAlias};
type Alias8 = <u8 as BitStore>::Alias;
type Alias8Alias = <Alias8 as BitStore>::Alias;

let mut data: BitArr!(for 40, in u8, Msb0) = bitarr!(u8, Msb0; 0; 40);
let (_head, rest): (_, &mut BitSlice<Alias8, Msb0>) = data.split_at_mut(5);

let mut chunks: ChunksMut<Alias8, Msb0> = rest.chunks_mut(5);
let _chunk: &mut BitSlice<Alias8, Msb0> = chunks.next().unwrap();

let mut chunks: ChunksMutNoAlias<Alias8, Msb0> = unsafe { chunks.remove_alias() };
let _chunk: &mut BitSlice<Alias8, Msb0> = chunks.next().unwrap();

And this example shows how to use .bit_domain_mut() in order to undo the effects of .split_at_mut(), so that .remove_alias() can complete its work.

use bitvec::prelude::*;
use bitvec::slice::{ChunksMut, ChunksMutNoAlias};
type Alias8 = <u8 as BitStore>::Alias;

let mut data: BitArr!(for 40, in u8, Msb0) = bitarr!(u8, Msb0; 0; 40);
let (_head, rest): (_, &mut BitSlice<Alias8, Msb0>) = data.split_at_mut(5);

let (head, body, tail): (
  &mut BitSlice<Alias8, Msb0>,
  &mut BitSlice<u8, Msb0>,
  &mut BitSlice<Alias8, Msb0>,
) = rest.bit_domain_mut().region().unwrap();

let mut chunks: ChunksMut<u8, Msb0> = body.chunks_mut(5);
let _chunk: &mut BitSlice<Alias8, Msb0> = chunks.next().unwrap();

let mut chunks: ChunksMutNoAlias<u8, Msb0> = unsafe { chunks.remove_alias() };
let _chunk: &mut BitSlice<u8, Msb0> = chunks.next().unwrap();

Trait Implementations

impl<'a, T, O, P> DoubleEndedIterator for RSplitNMutNoAlias<'a, T, O, P>where T: 'a + BitStore, O: BitOrder, P: FnMut(usize, &bool) -> bool, RSplitNMut<'a, T, O, P>: DoubleEndedIterator<Item = &'a mut BitSlice<T::Alias, O>>,

fn next_back(&mut self) -> Option<Self::Item>

Removes and returns an element from the end of the iterator.

fn nth_back(&mut self, n: usize) -> Option<Self::Item>

Returns the nth element from the end of the iterator.

fn advance_back_by(&mut self, n: usize) -> Result<(), NonZeroUsize>

🔬This is a nightly-only experimental API. (iter_advance_by)

Advances the iterator from the back by n elements.

fn try_rfold<B, F, R>(&mut self, init: B, f: F) -> Rwhere Self: Sized, F: FnMut(B, Self::Item) -> R, R: Try<Output = B>,

This is the reverse version of Iterator::try_fold(): it takes elements starting from the back of the iterator.

fn rfold<B, F>(self, init: B, f: F) -> Bwhere Self: Sized, F: FnMut(B, Self::Item) -> B,

An iterator method that reduces the iterator’s elements to a single, final value, starting from the back.

fn rfind<P>(&mut self, predicate: P) -> Option<Self::Item>where Self: Sized, P: FnMut(&Self::Item) -> bool,

Searches for an element of an iterator from the back that satisfies a predicate.

impl<'a, T, O, P> ExactSizeIterator for RSplitNMutNoAlias<'a, T, O, P>where T: 'a + BitStore, O: BitOrder, P: FnMut(usize, &bool) -> bool, RSplitNMut<'a, T, O, P>: ExactSizeIterator,

fn len(&self) -> usize

Returns the exact remaining length of the iterator.

fn is_empty(&self) -> bool

🔬This is a nightly-only experimental API. (exact_size_is_empty)

Returns true if the iterator is empty.

impl<'a, T, O, P> Iterator for RSplitNMutNoAlias<'a, T, O, P>where T: 'a + BitStore, O: BitOrder, P: FnMut(usize, &bool) -> bool,

type Item = &'a mut BitSlice<T, O>

The type of the elements being iterated over.

fn next(&mut self) -> Option<Self::Item>

Advances the iterator and returns the next value.

fn nth(&mut self, n: usize) -> Option<Self::Item>

Returns the nth element of the iterator.

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the iterator.

fn count(self) -> usize

Consumes the iterator, counting the number of iterations and returning it.

fn last(self) -> Option<Self::Item>

Consumes the iterator, returning the last element.

fn next_chunk<const N: usize>( &mut self ) -> Result<[Self::Item; N], IntoIter<Self::Item, N>>where Self: Sized,

🔬This is a nightly-only experimental API. (iter_next_chunk)

Advances the iterator and returns an array containing the next N values.

fn advance_by(&mut self, n: usize) -> Result<(), NonZeroUsize>

🔬This is a nightly-only experimental API. (iter_advance_by)

Advances the iterator by n elements.

fn step_by(self, step: usize) -> StepBy<Self>where Self: Sized,

Creates an iterator starting at the same point, but stepping by the given amount at each iteration.

fn chain<U>(self, other: U) -> Chain<Self, <U as IntoIterator>::IntoIter>where Self: Sized, U: IntoIterator<Item = Self::Item>,

Takes two iterators and creates a new iterator over both in sequence.

fn zip<U>(self, other: U) -> Zip<Self, <U as IntoIterator>::IntoIter>where Self: Sized, U: IntoIterator,

‘Zips up’ two iterators into a single iterator of pairs.

fn intersperse_with<G>(self, separator: G) -> IntersperseWith<Self, G>where Self: Sized, G: FnMut() -> Self::Item,

🔬This is a nightly-only experimental API. (iter_intersperse)

Creates a new iterator which places an item generated by separator between adjacent items of the original iterator.

fn map<B, F>(self, f: F) -> Map<Self, F>where Self: Sized, F: FnMut(Self::Item) -> B,

Takes a closure and creates an iterator which calls that closure on each element.

fn for_each<F>(self, f: F)where Self: Sized, F: FnMut(Self::Item),

Calls a closure on each element of an iterator.

fn filter<P>(self, predicate: P) -> Filter<Self, P>where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator which uses a closure to determine if an element should be yielded.

fn filter_map<B, F>(self, f: F) -> FilterMap<Self, F>where Self: Sized, F: FnMut(Self::Item) -> Option<B>,

Creates an iterator that both filters and maps.

fn enumerate(self) -> Enumerate<Self>where Self: Sized,

Creates an iterator which gives the current iteration count as well as the next value.

fn peekable(self) -> Peekable<Self>where Self: Sized,

Creates an iterator which can use the peek and peek_mut methods to look at the next element of the iterator without consuming it. See their documentation for more information.

fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P>where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator that skips elements based on a predicate.

fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P>where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator that yields elements based on a predicate.

fn map_while<B, P>(self, predicate: P) -> MapWhile<Self, P>where Self: Sized, P: FnMut(Self::Item) -> Option<B>,

Creates an iterator that both yields elements based on a predicate and maps.

fn skip(self, n: usize) -> Skip<Self>where Self: Sized,

Creates an iterator that skips the first n elements.

fn take(self, n: usize) -> Take<Self>where Self: Sized,

Creates an iterator that yields the first n elements, or fewer if the underlying iterator ends sooner.

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F>where Self: Sized, F: FnMut(&mut St, Self::Item) -> Option<B>,

An iterator adapter which, like fold, holds internal state, but unlike fold, produces a new iterator.

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F>where Self: Sized, U: IntoIterator, F: FnMut(Self::Item) -> U,

Creates an iterator that works like map, but flattens nested structure.

fn fuse(self) -> Fuse<Self>where Self: Sized,

Creates an iterator which ends after the first None.

fn inspect<F>(self, f: F) -> Inspect<Self, F>where Self: Sized, F: FnMut(&Self::Item),

Does something with each element of an iterator, passing the value on.

fn by_ref(&mut self) -> &mut Selfwhere Self: Sized,

Borrows an iterator, rather than consuming it.

fn collect<B>(self) -> Bwhere B: FromIterator<Self::Item>, Self: Sized,

Transforms an iterator into a collection.

fn collect_into<E>(self, collection: &mut E) -> &mut Ewhere E: Extend<Self::Item>, Self: Sized,

🔬This is a nightly-only experimental API. (iter_collect_into)

Collects all the items from an iterator into a collection.

fn partition<B, F>(self, f: F) -> (B, B)where Self: Sized, B: Default + Extend<Self::Item>, F: FnMut(&Self::Item) -> bool,

Consumes an iterator, creating two collections from it.

fn is_partitioned<P>(self, predicate: P) -> boolwhere Self: Sized, P: FnMut(Self::Item) -> bool,

🔬This is a nightly-only experimental API. (iter_is_partitioned)

Checks if the elements of this iterator are partitioned according to the given predicate, such that all those that return true precede all those that return false.

fn try_fold<B, F, R>(&mut self, init: B, f: F) -> Rwhere Self: Sized, F: FnMut(B, Self::Item) -> R, R: Try<Output = B>,

An iterator method that applies a function as long as it returns successfully, producing a single, final value.

fn try_for_each<F, R>(&mut self, f: F) -> Rwhere Self: Sized, F: FnMut(Self::Item) -> R, R: Try<Output = ()>,

An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error.

fn fold<B, F>(self, init: B, f: F) -> Bwhere Self: Sized, F: FnMut(B, Self::Item) -> B,

Folds every element into an accumulator by applying an operation, returning the final result.

fn reduce<F>(self, f: F) -> Option<Self::Item>where Self: Sized, F: FnMut(Self::Item, Self::Item) -> Self::Item,

Reduces the elements to a single one, by repeatedly applying a reducing operation.

fn try_reduce<F, R>( &mut self, f: F ) -> <<R as Try>::Residual as Residual<Option<<R as Try>::Output>>>::TryTypewhere Self: Sized, F: FnMut(Self::Item, Self::Item) -> R, R: Try<Output = Self::Item>, <R as Try>::Residual: Residual<Option<Self::Item>>,

🔬This is a nightly-only experimental API. (iterator_try_reduce)

Reduces the elements to a single one by repeatedly applying a reducing operation. If the closure returns a failure, the failure is propagated back to the caller immediately.

fn all<F>(&mut self, f: F) -> boolwhere Self: Sized, F: FnMut(Self::Item) -> bool,

Tests if every element of the iterator matches a predicate.

fn any<F>(&mut self, f: F) -> boolwhere Self: Sized, F: FnMut(Self::Item) -> bool,

Tests if any element of the iterator matches a predicate.

fn find<P>(&mut self, predicate: P) -> Option<Self::Item>where Self: Sized, P: FnMut(&Self::Item) -> bool,

Searches for an element of an iterator that satisfies a predicate.

fn find_map<B, F>(&mut self, f: F) -> Option<B>where Self: Sized, F: FnMut(Self::Item) -> Option<B>,

Applies function to the elements of iterator and returns the first non-none result.

fn try_find<F, R>( &mut self, f: F ) -> <<R as Try>::Residual as Residual<Option<Self::Item>>>::TryTypewhere Self: Sized, F: FnMut(&Self::Item) -> R, R: Try<Output = bool>, <R as Try>::Residual: Residual<Option<Self::Item>>,

🔬This is a nightly-only experimental API. (try_find)

Applies function to the elements of iterator and returns the first true result or the first error.

fn position<P>(&mut self, predicate: P) -> Option<usize>where Self: Sized, P: FnMut(Self::Item) -> bool,

Searches for an element in an iterator, returning its index.

fn max_by_key<B, F>(self, f: F) -> Option<Self::Item>where B: Ord, Self: Sized, F: FnMut(&Self::Item) -> B,

Returns the element that gives the maximum value from the specified function.

fn max_by<F>(self, compare: F) -> Option<Self::Item>where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the maximum value with respect to the specified comparison function.

fn min_by_key<B, F>(self, f: F) -> Option<Self::Item>where B: Ord, Self: Sized, F: FnMut(&Self::Item) -> B,

Returns the element that gives the minimum value from the specified function.

fn min_by<F>(self, compare: F) -> Option<Self::Item>where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the minimum value with respect to the specified comparison function.

fn unzip<A, B, FromA, FromB>(self) -> (FromA, FromB)where FromA: Default + Extend<A>, FromB: Default + Extend<B>, Self: Sized + Iterator<Item = (A, B)>,

Converts an iterator of pairs into a pair of containers.

fn copied<'a, T>(self) -> Copied<Self>where T: 'a + Copy, Self: Sized + Iterator<Item = &'a T>,

Creates an iterator which copies all of its elements.

fn cloned<'a, T>(self) -> Cloned<Self>where T: 'a + Clone, Self: Sized + Iterator<Item = &'a T>,

Creates an iterator which clones all of its elements.

fn array_chunks<const N: usize>(self) -> ArrayChunks<Self, N>where Self: Sized,

🔬This is a nightly-only experimental API. (iter_array_chunks)

Returns an iterator over N elements of the iterator at a time.

fn sum<S>(self) -> Swhere Self: Sized, S: Sum<Self::Item>,

Sums the elements of an iterator.

fn product<P>(self) -> Pwhere Self: Sized, P: Product<Self::Item>,

Iterates over the entire iterator, multiplying all the elements

fn cmp_by<I, F>(self, other: I, cmp: F) -> Orderingwhere Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Ordering,

🔬This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function.

fn partial_cmp<I>(self, other: I) -> Option<Ordering>where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Lexicographically compares the PartialOrd elements of this Iterator with those of another. The comparison works like short-circuit evaluation, returning a result without comparing the remaining elements. As soon as an order can be determined, the evaluation stops and a result is returned.

fn partial_cmp_by<I, F>(self, other: I, partial_cmp: F) -> Option<Ordering>where Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Option<Ordering>,

🔬This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function.

fn eq<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialEq<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are equal to those of another.

fn eq_by<I, F>(self, other: I, eq: F) -> boolwhere Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> bool,

🔬This is a nightly-only experimental API. (iter_order_by)

Determines if the elements of this Iterator are equal to those of another with respect to the specified equality function.

fn ne<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialEq<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are not equal to those of another.

fn lt<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically less than those of another.

fn le<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically less or equal to those of another.

fn gt<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically greater than those of another.

fn ge<I>(self, other: I) -> boolwhere I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically greater than or equal to those of another.

fn is_sorted_by<F>(self, compare: F) -> boolwhere Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Option<Ordering>,

🔬This is a nightly-only experimental API. (is_sorted)

Checks if the elements of this iterator are sorted using the given comparator function.

fn is_sorted_by_key<F, K>(self, f: F) -> boolwhere Self: Sized, F: FnMut(Self::Item) -> K, K: PartialOrd<K>,

🔬This is a nightly-only experimental API. (is_sorted)

Checks if the elements of this iterator are sorted using the given key extraction function.

impl<'a, T, O, P> FusedIterator for RSplitNMutNoAlias<'a, T, O, P>where T: 'a + BitStore, O: BitOrder, P: FnMut(usize, &bool) -> bool, RSplitNMut<'a, T, O, P>: FusedIterator,